WTB J model spinner and backplate

[N9428V]

I’m going back to a 2 blade prop. A trade has been made for a 2 blade prop from a piper. But I don’t think the spinners are the same. So I need a J model 2 blade spinner and back plate. Thanks in advance. N9428V

[carusoam]

MS has a prop guy... and a couple of Mooney parts sellers...

Let’s start with our prop guy... @Cody Stallings

then hit our used parts guys.. @Alan Fox @SheryLoewen @Jerry Pressley

-a-

[Alan Fox]

Pretty sure I may have 1

[OR75]

I did not think you could just swap props from piper to mooney that simply for certified

or maybe it happens to be the exact same prop based on the TCDS ?

May depend on the S/N of the J you have. If it is a J ....  

Edited March 31, 2020 by OR75

[Chris newton]

I have a spinner but not the backing plate if that helps any

[FloridaMan]

If it's a Hartzell and not a McCauley, get the spinner assembly from Hartzell. Using the Mooney part will cost you more money and aggravation in the long run.