moontownMooney Posted November 20, 2019 Report Share Posted November 20, 2019 I just wanted to pass along parts of a conversation I had with Cecilia at Brittain a couple weeks ago. I was inquiring about the status of their ability to provide retract step servo boots again, as theyve been aiming for for some time now. There were no firm details, but the last half dozen times id asked her this over the past ~year she honestly didnt sound very hopeful on the subject and didnt have any time estimate to offer. This time she seemed fairly upbeat and somewhat confident that it was going to happen and offered a time estimate of late spring or summer. So perhaps things are starting to solidify for their path forward with the FAA (PMA approval, etc. ?). Anyway, I sure hope they make it back online. Sent from my LM-V405 using Tapatalk 2 Quote Link to comment Share on other sites More sharing options...
chriscalandro Posted November 20, 2019 Report Share Posted November 20, 2019 Wrapped mine in electrical tape yesterday. Good as new. Quote Link to comment Share on other sites More sharing options...
carusoam Posted November 20, 2019 Report Share Posted November 20, 2019 Great update mM... Thanks for sharing the conversation! Best regards, -a- Quote Link to comment Share on other sites More sharing options...
Hank Posted November 20, 2019 Report Share Posted November 20, 2019 2 hours ago, chriscalandro said: Wrapped mine in electrical tape yesterday. Good as new. Don't forget the orings! Quote Link to comment Share on other sites More sharing options...
chriscalandro Posted November 21, 2019 Report Share Posted November 21, 2019 When I have a spare 300$ I'm going to get the electric conversion. I would however like to get my TC with PC overhauled. It's currently working but there are some quirks to it. It's been incredibly useful and I'd like to know I have someplace that can help me keep it running. Quote Link to comment Share on other sites More sharing options...
RLCarter Posted November 21, 2019 Report Share Posted November 21, 2019 Any idea who picked up Brittain? Quote Link to comment Share on other sites More sharing options...
moontownMooney Posted November 21, 2019 Author Report Share Posted November 21, 2019 When I have a spare 300$ I'm going to get the electric conversion. I would however like to get my TC with PC overhauled. It's currently working but there are some quirks to it. It's been incredibly useful and I'd like to know I have someplace that can help me keep it running. Have you talked to porter Strait? They can do pretty comprehensive diagnostics and repairs on the units.Sent from my LM-V405 using Tapatalk Quote Link to comment Share on other sites More sharing options...
MBDiagMan Posted November 21, 2019 Report Share Posted November 21, 2019 (edited) 10 hours ago, chriscalandro said: When I have a spare 300$ I'm going to get the electric conversion. I would however like to get my TC with PC overhauled. It's currently working but there are some quirks to it. It's been incredibly useful and I'd like to know I have someplace that can help me keep it running. About six months ago, the Britain lady recommended a company in Tulsa for overhauling my TC. The company was Pierce and Strait. They were great to work with and did a fabulous job. I now have an operative wing leveler in the Mooney. You probably can google up their contact info, but if you can’t, let me know and I will dig it up for you. Whoops, the previous poster said Porter and a Strait. Maybe that is correct. My memory is not what it used to be. Edited November 21, 2019 by MBDiagMan Quote Link to comment Share on other sites More sharing options...
Igor_U Posted November 22, 2019 Report Share Posted November 22, 2019 On 11/21/2019 at 4:15 AM, MBDiagMan said: Whoops, the previous poster said Porter and a Strait. Maybe that is correct. My memory is not what it used to be. Just Curious: How much they charged for OH? Quote Link to comment Share on other sites More sharing options...
MBDiagMan Posted November 22, 2019 Report Share Posted November 22, 2019 I can’t remember, but I will look it up for you. I want to say about$400, but the price varies depending upon what is wrong. Mine had two gyro’s or gyro bearings or something that had to be replaced so it was rather expensive. Quote Link to comment Share on other sites More sharing options...
moontownMooney Posted November 23, 2019 Author Report Share Posted November 23, 2019 They did some work on my turn coordinator and the accutrak unit and it was ~$700.Sent from my LM-V405 using Tapatalk Quote Link to comment Share on other sites More sharing options...
chriscalandro Posted November 25, 2019 Report Share Posted November 25, 2019 On 11/22/2019 at 11:50 PM, moontownMooney said: They did some work on my turn coordinator and the accutrak unit and it was ~$700. Sent from my LM-V405 using Tapatalk Oof Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.