crxcte

Made an order to Aerospace Welding Minneapolis with the same part number you listed. They had 4 in stock. I noticed Airplane Exhaust had the same part for $425, $300 less but none in stock otherwise I would of tried theirs.

Yes, after removing to take out for repair other cracks were seen. Looked like it had been repaired before.

That may work but they wanted ~$450 and may still need to go to the shop. A new one is looking like best bet. I was told mine was too far gone.

Anyone know where I can get a used good condition exhaust tailpipe.

Much appreciated. chris

I have a 68 M20F, was the vibrator originally mounted behind the panel? chris

I have Falcon and rates have been going up about 10% last 2 years even after dropped my hull value. Been insured with them for over 20 years, never had a claim. If anyone has a recommendation for another agent I am all ears. Chris

Meguiar's G12310 Plastx, Anyone ever try using this to clear up a windshield from haze? chris

Anyone tried using Eldorado SR-125A to strip fuel sealant?

Creekrat, hello, thanks for the reply. I went up yesterday and noticed the exhaust was a little loud. Came back to the ramp and the muffler side was half gone. Must of blew out. anyway, can you help me out? Chris

Checking to see if someone may have a muffler for M20F IO360 for sale? Chris

Yes, it has worked in the past. Started becoming intermittent then later stopped. So if I shorted Mic Jack Audio to Mic Jack Key In of the audio panel it should display transmit on the radio?

Does not work when using handheld microphone. Verified the plug used for intercom input had continuity with the PTT. If that is the problem must be between the intercom and audio panel.

Anyone have a trouble shooting guide for a PTT not working? Audio panel and intercom was checked out good on the bench. I have 2 coms and neither will TX when PTT is pressed on pilot or co-pilot side. As I understand it, when the tip and ring are connected (PTT) from the mic plug, TX should occur. Any help on checks would be great. layout is 2 coms, Narco CP36 audio panel, Sigtronics SPA400 intercom.

I have a CP 136 TSO that I would like to replace. Anyone have any experience replacing this intercom with another that is comparable in size and functionality? Thanks in advance.