1976 M20F fresh air bezel and valve

[Derrickearly]

Anyone have a source or alternative parts for the fresh air bezel and valve for a 20F?  Thank you.

[RLCarter]

Got a photo of what you need?

[Yetti]

in the ceiling cabin wise?  type this into google:  mooneyspace Ball vent

[M20F-1968]

I may have some parts depending on what you need.  The parts I woud have are from a 1968 F.

John Breda

[carusoam]

Plane plastics for a near facsimile...

+1 for updating to a ball vent... more work, but better result.

Best regards,

-a-

[N201MKTurbo]

I just upgraded to Wemacs and have the old vents for the overhead if that’s what you are looking for.

[Derrickearly]

15 hours ago, RLCarter said:

Got a photo of what you need?

They are missing in my plane; however, they should be items 38 and 39 in the attached image. 

[Derrickearly]

15 hours ago, Yetti said:

in the ceiling cabin wise?  type this into google:  mooneyspace Ball vent

This vent is down near the floor between the two seats. 

[Derrickearly]

4 hours ago, M20F-1968 said:

I may have some parts depending on what you need.  The parts I woud have are from a 1968 F.

John Breda

Here is an image from the parts manual. I’m missing 38 and 39. 

[Derrickearly]

4 hours ago, N201MKTurbo said:

I just upgraded to Wemacs and have the old vents for the overhead if that’s what you are looking for.

What part numbers did you use please?

[Derrickearly]

4 hours ago, carusoam said:

Plane plastics for a near facsimile...

+1 for updating to a ball vent... more work, but better result.

Best regards,

-a-

No luck with plane plastics. I’m leaning towards a ball vent. 

[N201MKTurbo]

1 hour ago, Derrickearly said:

What part numbers did you use please?

 

[carusoam]

Paging @Derrickearly...

See Rich’s pics above.  We might all be on a different page..?

How new is your 76 F?  
 

there are two sources of outside air...

1) At the ceiling... airflow controlled by a knob, opening the scoop on the roof. Newer planes got a naca duct in the tail...

2) At the instrument panel. The cabin heat system is attached to this one... controlled via push/pull on the instrument panel...

Older Mooneys got slide gates... slightly newer Mooneys got butterfly valves.

Best regards,

 

-a-

[Marauder]

Here is an image from the parts manual. I’m missing 38 and 39. 

I used one of these with an angled filler underneath to allow the airflow to point higher up.


https://www.aircraftspruce.com/catalog/appages/plasticeyeball1.php

I’ll snap a picture tonight and show you.


Sent from my iPad using Tapatalk Pro

[Marauder]

Never mind the picture later. Here is the picture now.




Sent from my iPad using Tapatalk Pro

[Yetti]

Oh the one on the console below the throttle quadrant.  Are you handy fabricating things?  There are a couple of people here that part out planes.

[Derrickearly]

Ordered one of these:

https://www.aircraftspruce.com/catalog/appages/largealumavblack.php

[Marauder]

Ordered one of these:
https://www.aircraftspruce.com/catalog/appages/largealumavblack.php

Let us know how it works out.


Sent from my iPhone using Tapatalk Pro

[eman1200]

Never mind the picture later. Here is the picture now....

Silly question but what is this:

[Marauder]

Silly question but what is this:

Floor illuminating light and a jack set. The old handheld mic used to be plugged in there.


Sent from my iPhone using Tapatalk Pro

[eman1200]

Floor illuminating light and a jack set. The old handheld mic used to be plugged in there.


Sent from my iPhone using Tapatalk Pro

Ahah, thanks. Seems like a good candidate for replacement with, um, say a bottle opener?

Also, was this Ozzy Osborn’s plane?

[Marauder]

 

Ahah, thanks. Seems like a good candidate for replacement with, um, say a bottle opener?

 

Also, was this Ozzy Osborn’s plane?

 

 

Bats baby. Bats!

 

I think that picture was taken before we converted the former ashtray covering plate for a mount for a removable mygoflight iPad mount. The mark was a centering X.

 

 

Sent from my iPhone using Tapatalk Pro

[Hank]

Wow, I'm impressed!  A light illuminating the floor! Fancy . . . All my C has is two overhead heaters, which throw red light towards the panel as a side effect of the incandescent heating elements.  

[Derrickearly]

Hopefully, this will work as an adapter for https://www.aircraftspruce.com/catalog/appages/largealumavblack.php

[Marauder]

52 minutes ago, Derrickearly said:

Hopefully, this will work as an adapter for https://www.aircraftspruce.com/catalog/appages/largealumavblack.php

The largest challenge for these eyeball replacements is the 25 degree movement. You may need to modify the vent adapter to angle the eyeball to get the coverage you want. Looking forward to the final product.