Jump to content

Recommended Posts

Posted

New panel being cut and going with a G3x, 750, remote audio, remote 345, G5, GFC500 (3 servo), guardian ipad mount (right side if we can work it out), panel USB chargers (I know a $20 amazon adapter is cheaper but at this point...)

Thinking of the AOA gauge that was at Mooney Summit last year but can't find the info on it--Oh and maybe something else if I can figure out how to get it approved.

Accepting donations to pay remainder of the balance especially from those of you that are responsible for this like @Marauder and @Bob_Belville:)

Always open to any gotchas or recommendations from those of you who have done these upgrades!

Kris

 

  • Like 3
  • Haha 2
Posted

We love spending other people’s money!  I guess some of us would be right at home in Congress.:)

Seriously though, it sounds like a great project that should serve you well.

  • Like 1
Posted
4 hours ago, ZuluZulu said:

Which size G3X?

10".  Would have done the 10" and 7" if they could have gone on the left side of the radio stack. but since the g5 is required it just doesn't fit.

Posted

I'm keeping the 430W below the 750.  I'd like to have the 750/650 combo but my 430 is functioning perfectly so it's staying.  The Kx155 and EI CGR's are going along with the vacuum pump and backup.  excited to see the weight changes.

Posted

Congrats. Should be well worth the investment. I have an iPad doc right side that sits horizontally. Honestly don’t like it. I’d encourage you to find a way to mount it vertically or omit the dock all together and just build in a knuckle and ram mount instead. All your approach plates are vertical and it makes no sense to me having the iPad sideways.


Sent from my iPad using Tapatalk

  • Like 2
Posted
2 hours ago, NJMac said:

 All your approach plates are vertical and it makes no sense to me having the iPad sideways.

currently use my 696 for approach plates.  I'm hoping I can be comfortable using the g3x to display them.  We'll see

Posted
1 hour ago, MBDiagMan said:

I like the iPad sideways so I can view maps and synthetic vision side by side when necessary, but that’s simply my personal preference.

That's more what I was thinking on the right side.  Also give my copilot something interesting to watch.

Posted

Having done basically the same with exception of I-pad mount, Shop promised next week????

As for the blame game, for me all blame and credit goes to Don Kay's panel fotos.

The bad news is , divorce attorneys don't take credit cards.......

As for the I pad mount, if you attach Sporty"s yoke mount upside down, you can squeeze the I-Pad Pro nicely in the yoke. ( Initial clamp mounts from under, not on top)

Convenient, sets low and no visual interference with avionics.

  • Like 1
Posted
7 hours ago, DAVIDWH said:

Having done basically the same with exception of I-pad mount, Shop promised next week????

As for the blame game, for me all blame and credit goes to Don Kay's panel fotos.

The bad news is , divorce attorneys don't take credit cards.......

As for the I pad mount, if you attach Sporty"s yoke mount upside down, you can squeeze the I-Pad Pro nicely in the yoke. ( Initial clamp mounts from under, not on top)

Convenient, sets low and no visual interference with avionics.

yes @donkaye and a few other have some blame!! lol

Thanks for the tip on the Ipad Pro...you talking about the 9.7 or the 11?  I have a first gen 12.9" pro that I love as well.

Posted
9 hours ago, Kris_Adams said:

That's more what I was thinking on the right side.  Also give my copilot something interesting to watch.

We're flying out to Sedona in 5 weeks and Im sure my wife will download some netflix onto the ipad on that side.  Will definitely watch better horizontally for her. 

  • Like 1
Posted

Amazing setup.  As I told another mser earlier today, look on the bright side, you'll no longer have to worry about where to invest the $XX,XXX you're sending to Garmin.  That money is their problem now!

  • Haha 1
Posted

Thanks for the tip on the Ipad Pro...you talking about the 9.7 or the 11?  I have a first gen 12.9" pro that I love as well

 

I pad 11, just takes some upside down bracket twisting, but fits nicely in the confines of the yoke.

 

  • Like 1
Posted

I’m going with the same setup minus the 750, I have a 530W, aGTX 345, and an EDM 900 already in the panel.

What equipment is the backlog on?

Mind sharing who’s doing the work, and ballpark $$$.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.