Mag trouble again

[jpusser]

I am having mag trouble again. I originally had a bad lead, it had almost rubbed in half.  It was causing a mag drop of 300 and a bad miss.  I fixed that and now am getting a drop of 150 on the right and hardly any on the left. Doesn't seem to be a miss and I can still get full rpm on the right.  Any suggestions?

[jpusser]

Does anyone know what mag part number I would need from spruce, they are the original bandix.  Does anyone have a used mag that will work for sale. It's a 62c

[Shadrach]

Quote: jpusser

Does anyone know what mag part number I would need from spruce, they are the original bandix.  Does anyone have a used mag that will work for sale. It's a 62c

[Kwixdraw]

Second  the A&P advice. You need someone to look at your logs and check to see what service has been done and needs to be done. Mags need someone who has the equipment and knowledge to do the job correctly. Just using the wrong grease is enough to really screw up a mag overhaul.

[DaV8or]

Quote: jpusser

I am having mag trouble again. I originally had a bad lead, it had almost rubbed in half.  It was causing a mag drop of 300 and a bad miss.  I fixed that and now am getting a drop of 150 on the right and hardly any on the left. Doesn't seem to be a miss and I can still get full rpm on the right.  Any suggestions?