Flash Posted January 30, 2017 Report Posted January 30, 2017 I'm taking my 1993 MSE to T&P Aero Refinishers in Salinas on Wednesday to get it re-painted, and I have a question for the group: Is there any reason I shouldn't keep the current, traditional paint scheme? I have two reasons for wanting to keep the familiar look: (1) I like it, and (2) I have had a lot of fun in N315L in the past 16 1/2 years, and every time I see it I have fond memories, and I don't want to feel like I'm looking at a different plane than the one I love. The only down side I can see is that I may not get a perfect match for what I have now, and that this difference would ruin the desired effects of Nos. 1 and 2 above. Am I missing something? Have others repainted with the same scheme, and if so, were they later happy with that choice? 1 Quote
MooneyMitch Posted January 30, 2017 Report Posted January 30, 2017 My opinion only, it's strictly a matter of choice and personal preference. I've walked 3 Mooney airplanes through the paint process. Two of them, the existing paint schemes were changed from the original to more recent Mooney paint trends. My most recent Mooney is my new [to me] little old M20D, which I've dubbed as my "Mini-Mooney". Due to this planes history and its vintage, I chose to honor and semi-emulate a Mooney paint scheme from 1963 era. If you are attached to your current scheme, by all means, just have it reproduced. If not, then off you go to what will make you pleased every time you lay eyes upon your beauty! Regarding replicating your current scheme, I will emphatically state that Tony at ArtCraft is quite an artist and will quite accurately reproduce for you, colors and all, or create a design for you. If you provide quality photos to him, he will make your reproduction happen. You can even participate hands on, during the scheme layout...............I did each time. Also, at ArtCraft, you are warmly welcomed with open arms and open doors to their facility, and you are more than welcome to participate, first hand, as your plane goes through the paint process. You can be there, in the paint facility as much as you choose. As a disclaimer, I am not in any way, associated financially with ArtCraft. I simply admire their product, having gone through it 3 times. Here's my little "Mini-Mooney fresh from ArtCraft Paint. 4 Quote
Bob_Belville Posted January 30, 2017 Report Posted January 30, 2017 I like the idea of a scheme that gives a nod to the original that you like and puts a newer twist on it to freshen the look. Perhaps more up to date colors and wider or narrower trim strips. I don't know if Scheme Designers can do a design without a swoosh... 3 Quote
carusoam Posted January 30, 2017 Report Posted January 30, 2017 (edited) Modern paint, modern taping process, computer graphics, Mooney experience are all very helpful for getting exactly what you want. There will be no room for creative interpretation when the customer says... 'I want exactly this' Make sure your painter understands your request. Ask him how he is going to meet your expectations. Saving money will be found in not making any mistakes. Take lots of detailed pictures before. Once the old paint comes off, all you have are pictures and fuzzy memories... PP ideas only,... Best regards, -a- Edited January 30, 2017 by carusoam Quote
peevee Posted January 30, 2017 Report Posted January 30, 2017 I'm a sucker for the traditional blue and gold, I think it's super sharp and our old plane had it. New has a red/white/gold more modern, and I don't care for it as much but who cares, it's your airplane! Quote
RobertGary1 Posted January 30, 2017 Report Posted January 30, 2017 Maybe trends. At one point it was popular to paint your older Mooney using the paint scheme of the new planes. Just to fool people into thinking the plane is 40 years younger. -Robert Quote
Jeev Posted January 30, 2017 Report Posted January 30, 2017 (edited) Its your aircraft make it what you want, it's not like you are putting a nasty paint scheme on there. My J came to me with the same scheme but different colors, I liked it but changed it when I had ArtCraft do the repaint. However if I had all the fond memories as you do I would have kept it. BTW another vote for ArtCraft they are honest people with good attitudes that do GREAT work at a fair price. Edited January 30, 2017 by Jeev 1 Quote
BobAustin Posted January 30, 2017 Report Posted January 30, 2017 I repainted my Mooney 201 Missile Exactly the original scheme. I only had to please myself. Many great memories... I bought the plane new in 1985 without factory paint with the advise coming from Roy LoPresti then the president of Mooney. and my neighbor. Took it to Poplowski, Ennis ,TX then the best painter in this part of the country. Thirty (yes 30 ) years later had his son repaint . Note: the paint nowdays is NOT equal to the paint back then thanks to the EPA trying to "save us" Bob Quote
MooneyMitch Posted January 30, 2017 Report Posted January 30, 2017 "Note: the paint nowdays is NOT equal to the paint back then thanks to the EPA trying to "save us" Not wishing to contradict or disagree with the above statement, the new owner of my former Ovation, was quite impressed with the quality of paint on the plane which was refinished in February of 2009. He, along with myself were in agreement that the paint finish appeared to be in great condition. In my opinion, the paint looked still as though the plane had just come out of the paint shop. i believe care of the paint finish after the fact, will have a major affect on longevity. Quote
exM20K Posted January 30, 2017 Report Posted January 30, 2017 My 09 Acclaim S has multiple spots where the paint did not adhere. I suspect poor surface prep. I don't believe this is the only pre-shutdown plane poorly painted. Quote
TTaylor Posted January 30, 2017 Report Posted January 30, 2017 The Blue and Gold I think is the BEST design ever done on a Mooney, classic but still in style. Quote
jetdriven Posted January 30, 2017 Report Posted January 30, 2017 (edited) Sherwin-Williams Jetglo and Imron AF400 are still excellent paints, as good as anything ever produced. Not the same can be said for the other brands. Particularly al Edited January 30, 2017 by jetdriven 1 Quote
MooneyMitch Posted January 30, 2017 Report Posted January 30, 2017 It's my belief that preparation is a paramount part of the success and longevity of the painting process. Quote
peevee Posted January 30, 2017 Report Posted January 30, 2017 the one thing I don't care for is when they put bands on the wings. When you wipe bugs off eventually it get to the edge of the upper layer and starts to slowly chip in my experience. Quote
Bob_Belville Posted January 30, 2017 Report Posted January 30, 2017 19 minutes ago, jetdriven said: Sherwin-Williams Jetglo and Imron AF400 are still excellent paints, as good as anything ever produced. Not the same can be said for the other brands. Particularly al My paint from 1998 and always hangared has Imron for the 3 accent colors which still look new. The Matterhorn White, not so much. 1 Quote
jetdriven Posted January 30, 2017 Report Posted January 30, 2017 WHat kind of paint is the white base coat? Quote
Bob_Belville Posted January 30, 2017 Report Posted January 30, 2017 4 minutes ago, jetdriven said: WHat kind of paint is the white base coat? I've got to check at the airport. My electronic logbook here does not include that info, just the color, but I think the hard copy has the mfg. I'm curious enough to take a little ride. Quote
aviatoreb Posted January 30, 2017 Report Posted January 30, 2017 That is a beautiful shade of red - what is it called? Quote
Flash Posted January 30, 2017 Author Report Posted January 30, 2017 For a 1993 MSE, the codes were: Top color: Really White.Color number WP696, Manufactured by P&L. Bottom color: Balboa Blue. Color number T?10122. Manufactured by P&L. I'm not sure of the character after the "T" Accent color: Post Red. Color number TR10030. Manufactured by P&L. Stripes: Gold. Color number H8066U. Manufactured by Dupont. Quote
Bob_Belville Posted January 30, 2017 Report Posted January 30, 2017 54 minutes ago, jetdriven said: WHat kind of paint is the white base coat? Sterling Matterhorn White # 1528. Ms. Google leads me to: http://sterlinglacquer.com/products.html Quote
DXB Posted January 30, 2017 Report Posted January 30, 2017 If you love how your plane looks and plan to keep it a while, paint it exactly the way you want it - everyone else with an opinion can safely be told where to stick it However in case you are Pokemon fan, do consider this stylish and eye-catching Pikachu scheme! 1 Quote
jetdriven Posted January 30, 2017 Report Posted January 30, 2017 1 hour ago, Bob_Belville said: Sterling Matterhorn White # 1528. Ms. Google leads me to: http://sterlinglacquer.com/products.html I think the Sterling on your plane might be urethane but is also just like Alumigrip, it is a very cheap paint that is not nearly in the same league as Jetglo and Imron. Quote
rbridges Posted January 30, 2017 Report Posted January 30, 2017 I guess I'll have to be the dissenting opinion. I really like the newer paint schemes. I do appreciate the traditional styles, and I love seeing a plane that's seen lots of care. If it's my money, I'd love to have something different. I don't know if my short body could pull off the Ovation/Acclaim paint scheme, but I'd be open to the idea if it did. An example is this plane from one of our members. It's a 1968 F model, and I love it. 1 Quote
jetdriven Posted January 30, 2017 Report Posted January 30, 2017 5 minutes ago, rbridges said: I guess I'll have to be the dissenting opinion. I really like the newer paint schemes. I do appreciate the traditional styles, and I love seeing a plane that's seen lots of care. If it's my money, I'd love to have something different. I don't know if my short body could pull off the Ovation/Acclaim paint scheme, but I'd be open to the idea if it did. An example is this plane from one of our members. It's a 1968 F model, and I love it. So it this. A modified acclaim / ovation style. The waterline is higher, tail is solid, and a little more color on the wingtip. 7 Quote
Bob_Belville Posted January 31, 2017 Report Posted January 31, 2017 1 hour ago, jetdriven said: I think the Sterling on your plane might be urethane but is also just like Alumigrip, it is a very cheap paint that is not nearly in the same league as Jetglo and Imron. Byron, I've been suspicious that even though the log entry refers to polyurethane paint that the white was inferior. I wonder if that is common, to use a cheaper paint on the larger areas. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.