carusoam Posted August 5, 2019 Report Posted August 5, 2019 Seeing if @NotarPilot is stopping by... -a- Quote
NotarPilot Posted August 14, 2019 Author Report Posted August 14, 2019 On 8/4/2019 at 6:25 PM, carusoam said: Seeing if @NotarPilot is stopping by... -a- You rang? Quote
carusoam Posted August 15, 2019 Report Posted August 15, 2019 17 hours ago, NotarPilot said: You rang? IJS and Hondo above were asking about switch covers... I can’t remember if you have a stash or if somebody else had them... Best regards, -a- Quote
eman1200 Posted August 15, 2019 Report Posted August 15, 2019 any chance you have one that either says INOP or just blank? if so I'd take one of those and one strobe. thanks! Quote
AH-1 Cobra Pilot Posted August 17, 2019 Report Posted August 17, 2019 (edited) I have been fighting computers for the last few weeks. I just got one running when the other broke. Now I am at a CFI course, so I will take care of all I can next week. Feel free to PM me with your requests. Edited August 17, 2019 by Ah-1 Cobra Pilot 1 Quote
carusoam Posted August 17, 2019 Report Posted August 17, 2019 That somebody else has checked in! I need to work on my memory challenges, a bit harder... @Hondo, @ijs12fly, and @eman1200 See AH1’s post above... Best regards, -a- Quote
PJClark Posted November 24, 2019 Report Posted November 24, 2019 (edited) @Ah-1 Cobra Pilot are you still making these? my Pitot Heat rocker has gone all wobbly. I could use BOOST PITOT LDG NAV STROBE ROT PUMP HEAT LITE LITE LITE BCN Thanks I sent you a PM PJ Edited November 24, 2019 by PJClark added info Quote
AH-1 Cobra Pilot Posted November 26, 2019 Report Posted November 26, 2019 I do have a few covers, and I will get back to everybody. When my computer crashed, it took the CAD files with it. I still have some of the files, but I have to verify if one is the latest/greatest. I will probably get back to the Maker Space with the laser engraver in January/February, so I can finish them then. Please have patience with the process. 1 Quote
ijs12fly Posted November 26, 2019 Report Posted November 26, 2019 Ok good luck restoring your files, please let us know when the factory is up and running again. Sent from my iPhone using Tapatalk 1 Quote
PJClark Posted November 26, 2019 Report Posted November 26, 2019 @Ah-1 Cobra Pilot awesome thanks! Quote
PJClark Posted December 23, 2019 Report Posted December 23, 2019 @Ah-1 Cobra Pilot any luck yet with your computers? Or by chance have a Pitot Heat switch cover laying around? Mine finally fell off on Friday Merry Christmas all! Quote
n5756k Posted February 7, 2020 Report Posted February 7, 2020 I need a new cover for my M20J (Radio Master). Any chance of buying one from you? Tom Moquin 847.340.2325 Quote
AH-1 Cobra Pilot Posted March 12, 2020 Report Posted March 12, 2020 I finally have lots more Klixon switch covers! I have all the usual letterings, and I can still make custom covers. I have decided to simplify things and charge $10/each, including shipping. Please PM me with your address and which letterings you want. 3 2 Quote
AH-1 Cobra Pilot Posted March 18, 2020 Report Posted March 18, 2020 Good news and bad news... I just took my written test to get my CFI-I; got a 100%! So now I am ready to start shipping switch covers. The bad news is that the Innovation Studio, (MakerSpace by another name), is closed for at least two weeks, so I cannot make anything customized until they reopen. (Stupid virus.) I think I have responded to everyone who PMed me before. If I missed you, I apologize. 2 1 Quote
n5756k Posted March 18, 2020 Report Posted March 18, 2020 Congrats on passing your written test. Please send me an Avionic master switch cover ( I believe I sent you a picture of my broken on this past month). Please send it to....Tom Moquin, 48W529 Immelman Lane, Hampshire, IL. 60140. Also please send me your full name so I can send you the $10.00. Thank you, Tom Moquin Tel: 847.340.2325. email: tamoquin@foxvalley.net Quote
carusoam Posted March 18, 2020 Report Posted March 18, 2020 Congrats on that huge score, AH1! That takes dedication! Best regards, -a- Quote
AH-1 Cobra Pilot Posted March 2, 2021 Report Posted March 2, 2021 I FINALLY made it back to the Innovation Studio, (maker space), and have been making switch covers. Please PM me if you need any. For those who have PM'ed me in the past, I think I have already responded directly to everyone, but if I have missed you I apologize. 3 Quote
PeteMc Posted March 2, 2021 Report Posted March 2, 2021 Welcome Back!! (Excited for the finishing touches to my panel.) Quote
carusoam Posted March 3, 2021 Report Posted March 3, 2021 Cobra, I’m sending somebody your way... @RussG Russ just came across his first broken switch cover... Best regards, -a- Quote
bradp Posted March 3, 2021 Report Posted March 3, 2021 @AH-1 Cobra Pilot are your cad / stl files open source by any chance? I’m interested in trying out some different filament I have laying around. Quote
AH-1 Cobra Pilot Posted March 3, 2021 Report Posted March 3, 2021 (edited) 1 hour ago, bradp said: @AH-1 Cobra Pilot are your cad / stl files open source by any chance? I’m interested in trying out some different filament I have laying around. No. I spent LOTS of time and effort to create the CAD. (Just go back a few pages in this thread to see.) As far as filaments go, PLA will get soft in a hot summer airplane, nylon does not take paint well, nor does PETG and a few others, so ABS is the winner. Edited March 3, 2021 by AH-1 Cobra Pilot Quote
bradp Posted March 3, 2021 Report Posted March 3, 2021 3 minutes ago, AH-1 Cobra Pilot said: No. I spent LOTS of time and effort to create the CAD. (Just go back a few pages in this thread to see.) As far as filaments go, PLA will get soft in a hot summer airplane, nylon does not take paint well, nor does PETG and a few others, so ABS is the winner. Thanks for the info. The reason I asked is because the set I got lasted maybe 5 pushes before they started splitting down the middle, so I put my old busted OEM ones back on. Probably was a temp / annealing issue with that batch. I have had really good luck with prusament ASA and it off gasses a lot less. Quote
n5756k Posted March 3, 2021 Report Posted March 3, 2021 I would like to buy 8 different switches covers. Please email me at tamoquin@foxvalley.net or call me at 847 340-2325. Thank you, Tom Moquin Quote
carusoam Posted March 4, 2021 Report Posted March 4, 2021 Message for @AH-1 Cobra Pilot above... -a- Quote
AH-1 Cobra Pilot Posted March 30, 2021 Report Posted March 30, 2021 I managed to make some new switch covers with inverted colors. PM me if you are interested in them. 3 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.