outermarker Posted May 28, 2016 Report Posted May 28, 2016 The fuse box cover and the landing gear / flap indicator cover have become brittle with age and have cracked or have pieces missing. Where can I find these two items either new or used? Savage yards? Quote
kortopates Posted May 28, 2016 Report Posted May 28, 2016 Mooney factory through your favorite MSC. Sent from my iPhone using Tapatalk Quote
bradp Posted May 28, 2016 Report Posted May 28, 2016 Plane plastics has most interior plastic parts. Quote
jrwilson Posted May 28, 2016 Report Posted May 28, 2016 I was googling and I don't think plane plastics has the part. eBay didn't have them. An old thread talked about doing an owner made part Quote
jrwilson Posted May 28, 2016 Report Posted May 28, 2016 Then use a new placard for your owner produced part. 1 Quote
1524J Posted May 28, 2016 Report Posted May 28, 2016 3 hours ago, outermarker said: The fuse box cover and the landing gear / flap indicator cover have become brittle with age and have cracked or have pieces missing. Where can I find these two items either new or used? Savage yards? Just replaced my trim/flap indicator. Lasar has them for $135. Get your Dremel tool out.....youl'll need to do lots of trimming. I used my original metal placard. Quote
Hank Posted May 28, 2016 Report Posted May 28, 2016 10 hours ago, jrwilson said: Then use a new placard for your owner produced part. Hey, your flap and trim position indicators are curved! Mine are horizontal bars that move straight up and down. And without printing the picture and playing with scissors, I'm not sure the Fuel Drain Valve arcs will fit around the outside of the Fuel Selector, either. Where did you find this nice selection of placards? The one for Emergency Gear Extension is in pretty bad shape (too much sweaty IFR training a couple of years ago), and I'd really like to get one that is legible. I know the text (have a copy somewhere), but would love one that will hold up to sweaty knees flying in the Deep South. None of my placards are metal, except maybe the hat rack 10-pounder. Quote
RLCarter Posted May 28, 2016 Report Posted May 28, 2016 Plane Plastics has them, I installed all 4 pieces that go around the front wheel well (flap/trim indicator) on my 65 E, just give them a call not all their products are listed. Quote
jrwilson Posted May 28, 2016 Report Posted May 28, 2016 35 minutes ago, Hank said: Hey, your flap and trim position indicators are curved! Mine are horizontal bars that move straight up and down. And without printing the picture and playing with scissors, I'm not sure the Fuel Drain Valve arcs will fit around the outside of the Fuel Selector, either. Where did you find this nice selection of placards? The one for Emergency Gear Extension is in pretty bad shape (too much sweaty IFR training a couple of years ago), and I'd really like to get one that is legible. I know the text (have a copy somewhere), but would love one that will hold up to sweaty knees flying in the Deep South. None of my placards are metal, except maybe the hat rack 10-pounder. That was higher graphics.com. I havnt used them, just a Google search. They had different versions. Quote
1524J Posted May 28, 2016 Report Posted May 28, 2016 New flap/trim indicator from Lasar.....just be prepared to trim.....a lot. 1 Quote
jetdriven Posted May 28, 2016 Report Posted May 28, 2016 Moody aero graphics can make any placard, and you can buy just one not the whole sheet Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.