Ranger AeroCruze 100 Success info needed.

[Jakes Simmons]

     Trying for a Hail Mary pass before selling my Mooney. Talked to Chris from Duncan Aviation, sounds like BK may eventually make a bracket for the pitch servo on my serial number Mooney, but no solid timeframe. He had mentioned hearing of several Ranger owners who had the -100 installed, their installers modified the pitch pushrod and servo bracket, covered under the STC, with good results. My original installer is not able to accomplish the mods.
     Currently I have a complete AeroCruze kit sitting in a box on my hangar floor. If any Ranger owners out there who have an installed AeroCruze 100 or know an owner that did, I’d appreciate a shout to gather info from your experience and a direction toward a shop who has done the work. The issue I’ve run into is my s/n 1213 has a different doubler under the cargo area vs earlier -C’s. The stock install kit does not work.

      If the hoops to install this a/p become too high, I’ll send the a/p back and sell the plane. For my type of flying, it’s a safety issue when carrying non pilot passengers. Appreciate the help…

[Ron McBride]

Is it possible that brackets from an E, F, or J might work?