Purchasing Moony 20E

[hammdo]

And there is a difference in the original SWTA 201 windshield vs the factory/Lasar 201. The Lasar 201 is bit further forward and doesn’t have as much room for the inspection panels. Something to keep in mind when you fit the cover - may need to tweak things for the SWTA cover to fit.

I have the SWTA 201 version on my C and just had the windshield replaced.

-Don

[nevadabandit]

HELP!!    Bled the hydraulic system today, rebuilt the Flap Pump (new O rings)

Bled the brakes, Left unit cleaned up great and has great brake action, but the right would pump up and then not release.  Removed the Right master cylinder, put new O rings in it, found the A-47G-045 Valve assemble O ring dry and cracked!

As you know the little O ring is a part of the valve assembly and must be replaced as a unit (see Print attached)  Where can we find one of these to purchase???

Nevadabandit on the search!!

[MB65E]

Call Bill Goetschel super helpful guy. He tooled up to rebuild these. There is a beveled washer that cracks.  He has a little hustle on eBay, but just call him directly.
+1 (507) 581-9761

carolannegoetschel@yahoo.com

-Matt

[nevadabandit]

2 hours ago, MB65E said:

Call Bill Goetschel super helpful guy. He tooled up to rebuild these. There is a beveled washer that cracks.  He has a little hustle on eBay, but just call him directly.
+1 (507) 581-9761

carolannegoetschel@yahoo.com

-Matt

Thank you Matt, Call Bill and were all set up to send both units to him!   I also found that Avstat Aviation in Van Nuys CA has the service kits, they are #VV15625 for about $80

Thanks again for the tip!