Jump to content

Recommended Posts

Posted

Does anyone have picture of their J model fuel sender locations? Mainly the inter sender location. I believe its accessed from the inside of the fuselage, I could be wrong. 

Posted

I just saw mine yesterday as they were chasing down a fuel leak in my J. You need to remove the interior panel next to your seat. It is located right behind that and is easy to access. Sorry I don't have a picture. 

Posted

Every Mooney has a pair behind the cabin wall cover…

It is good to get a look at them and see the rubber fuel line connector as well…

These are potential sources of fuel drips as the parts age….

Larger fuel tanks have a second fuel level sensor on the outer end of the tank…

There is a picture of one posted around here recently…

Best regards,

-a-

Posted

KB is showing a great pic…

A) is the sender that often doesn’t get a new seal, with proper torque on the screws….

B ) is the rubber connector on the fuel line that suffers from mage issues over the decades…

This is an unbelievably clean area…  nice work KB!

Often, there is decades of dirt that settles in the area and many blue stains….

Best regards,

-a-

AEF66F69-C3E1-4386-99A7-8E9FF81ABE7C.jpeg

  • Like 1
Posted
22 hours ago, carusoam said:

KB is showing a great pic…

A) is the sender that often doesn’t get a new seal, with proper torque on the screws….

B ) is the rubber connector on the fuel line that suffers from mage issues over the decades…

This is an unbelievably clean area…  nice work KB!

Often, there is decades of dirt that settles in the area and many blue stains….

Best regards,

-a-

AEF66F69-C3E1-4386-99A7-8E9FF81ABE7C.jpeg

Labor of love. Px with allergies, carpets and little yellow old insulation flakes got 86’d. Placard and floor bracket next 

265DFE8E-0D6C-449F-935B-8B65D55E5739.jpeg

  • Like 1
  • 2 months later...
Posted

Sort of related to the fuel sender lines of inquiry, (didn't want to start a new line) I am looking for some guidance as to under which panel I'll find the wiring to the outboard fuel sender.  I need to check the wiring to the outboard sender (looking for a broken wire) and didn't want to guess.  I have a K 231 and there's a whole lotta panels in its wings.  

Appreciate any help.

G

Posted

I don't have a K Service manual but you need to remove the first panel outboard of fuel tank Rib (just outboard of Fuel cap).

SM pictures would help...

  • Like 1
Posted

Thanks.  I went through the manuals again and I decided to start there too.  I thought that the tanks extended further, but the outboard rib from the filler would be a logical place to start.

Posted
3 hours ago, GMBrown said:

Thanks.  I went through the manuals again and I decided to start there too.  I thought that the tanks extended further, but the outboard rib from the filler would be a logical place to start.

Use extra caution regarding guessing where the fuel isn’t… 

Better to start too far away… and have to open another panel…

Than to have fuel leak out of the first screw… 

Best to use a manual screw driver…

Power driver, opening the wrong inspection panel, lit a young Mooney mechanic on fire… (best to be avoided)

PP thoughts only… this occurred at my home drome… years ago…

Best regards,

-a-

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.