elimansour Posted October 1, 2020 Report Posted October 1, 2020 Hi all. My plane is in annual and needs a new oil temp probe. My MSC has not been able to get a hold of Mooney about this part and LASAR has told them that the part is showing as no longer available. Does anyone have a good source for 28v oil temp probe? The part number according to the MSC is 102-00066 but that part apparently no longer exists so there must be an alternate part number now? Thanks! Quote
elimansour Posted October 1, 2020 Author Report Posted October 1, 2020 I just looked in the IPC and I show the following part number: 880061-501. Quote
Cptcloud Posted October 1, 2020 Report Posted October 1, 2020 (edited) I have 2 nos. I just replaced the one in my 1990 MSE. Edited October 1, 2020 by Cptcloud added photo 1 Quote
ZuluZulu Posted October 2, 2020 Report Posted October 2, 2020 9 hours ago, elimansour said: Hi all. My plane is in annual and needs a new oil temp probe. My MSC has not been able to get a hold of Mooney about this part and LASAR has told them that the part is showing as no longer available. Does anyone have a good source for 28v oil temp probe? The part number according to the MSC is 102-00066 but that part apparently no longer exists so there must be an alternate part number now? Thanks! Try Maxwell too, if you haven't already. 1 Quote
carusoam Posted October 2, 2020 Report Posted October 2, 2020 I had the same challenge just over a year ago... Bought one from an MSer that had installed a JPI... I had called an MSC to see if they could get one... it was hundreds of dollars and about four months to possibly make happen... There is a similar. Discussion going on for an oilT probe around here... @PT20J See if Skip has any ideas while he is looking... Best regards, -a- 1 Quote
Cptcloud Posted October 2, 2020 Report Posted October 2, 2020 I have 2 new old stock if anyone needs one. It is part number 88009-501. Lewis Eng Co 56B3A9. I just replaced the one in my 1990 MSE. Quote
elimansour Posted October 2, 2020 Author Report Posted October 2, 2020 1 hour ago, mike261 said: Ill ship you this one, pay for the shipping. if it works for you, venmo me something. it does me no good on my desk. mike Thank you Mike. Unfortunately, my MSC is telling me that I will need the shorter one - the 56B3A9. Quote
elimansour Posted October 2, 2020 Author Report Posted October 2, 2020 3 hours ago, Cptcloud said: I have 2 new old stock if anyone needs one. It is part number 88009-501. Lewis Eng Co 56B3A9. I would love one. Will send you a pm. Quote
Costa Leite Posted October 22, 2021 Report Posted October 22, 2021 On 10/2/2020 at 1:42 PM, Cptcloud said: I have 2 new old stock if anyone needs one. It is part number 88009-501. Lewis Eng Co 56B3A9. I just replaced the one in my 1990 MSE. CptCloud, I am in the same situation… I need a 102-00066. Do you steel have one spare? I also have a 98 M20J Allegro and it uses a MERS 102-00066… and not a Rochester 3080-37, as I thought.. Many thanks in advance frederico Quote
Cptcloud Posted October 22, 2021 Report Posted October 22, 2021 I sold the extra ones to: Don Nieser Commodore Aerospace Corp 6221 Commodore Aerospace Corp Oklahoma City OK 73162 405-503-4686 He said he had several of them. Quote
tls pilot Posted May 10, 2023 Report Posted May 10, 2023 Does anyone know how these are wired? IF a grounding issue will it go full scale on high side? Anyone have one available? part number 88009-501. Lewis Eng Co 56B3A9. Thanks Quote
tls pilot Posted May 10, 2023 Report Posted May 10, 2023 Lastly where on the engine is this connected? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.