WTB: Fuel selector valve, Dukes

[philipneeper]

Mooniacs: 

 

I am in need of a Dukes fuel selector valve P/N 3331-0 or new P/N 940073-507

940073-507

[KSMooniac]

Try LASAR or Paul Loewan's Mooney salvage.

Sent from my LG-US996 using Tapatalk

[philipneeper]

  On 8/23/2017 at 5:58 PM, KSMooniac said:

Try LASAR or Paul Loewan's Mooney salvage.

Sent from my LG-US996 using Tapatalk
 

Expand  

No dice on LASAR... Ill try to find Pauls number

[Dream to fly]

Send yours into LASAR and have them rebuild it.  They rebuilt mine three months ago and it works and doesn't leak. Wasn't very expensive either.  Three day turn around but I live in the middle of no mans land.

[philipneeper]

Mine isn't the rebuild kind. And the valve works fine. Mine had a broken bolt in where the sump attaches. Corroded and snapped off. Couldn't drill and re tap. 

[Dream to fly]

Maybe these guys would have it I've used them too it might be worth a shot. www.wentworthaircraft.com

 

[KSMooniac]

There is one on eBay right now too...expensive but accepting offers. Offer $200 and see what happens.

Sent from my LG-US996 using Tapatalk

[philipneeper]

  On 8/23/2017 at 8:18 PM, KSMooniac said:

There is one on eBay right now too...expensive but accepting offers. Offer $200 and see what happens.

Sent from my LG-US996 using Tapatalk
 

Expand  

Yea thats BAS parts. I don't know why he does offers. I messed with recently and did an offer, which i was very reasonable, sent me a PM, long story short, what he list is what he wants. 

 

Called all the big named salvage places, no joy. 

 

I got a guy in FL that is looking and supposed to let me know. 

 

I saw a post on here from 2014 that John posted having one. Sent him a PM as well. 

[RLCarter]

  On 8/23/2017 at 6:05 PM, philipneeper said:

Mine isn't the rebuild kind. And the valve works fine. Mine had a broken bolt in where the sump attaches. Corroded and snapped off. Couldn't drill and re tap. 

Expand  

Why do you say it couldn't be drilled and taped, or heli-coiled? Or did some one try and make it worse? Can you post a photo? 

[KSMooniac]

Jerry/acpartswhse here might have one as well.

Sent from my LG-US996 using Tapatalk

[Jerry Pressley]

probably have one here.  off what year?  jerry

[Guest]

  On 8/23/2017 at 6:05 PM, philipneeper said:

Mine isn't the rebuild kind. And the valve works fine. Mine had a broken bolt in where the sump attaches. Corroded and snapped off. Couldn't drill and re tap. 

Expand  

Search for someone who can do "electrical discharge machining". They can remove broken bolts, taps etc.

Clarence

[philipneeper]

  On 8/24/2017 at 10:36 PM, acpartswhse said:

probably have one here.  off what year?  jerry

Expand  

1978 Mooney.... goes in floor board. underneath pilot with pull sump next to the selector. 

[N601RX]

As mentioned above a sinker edm will remove it or you can put it in an anodizing tank for a few minutes and the broken tap or bolt will be eroded away. 

[philipneeper]

i am beyond that. i know how to remove corroded hardware, tap/helicoil. this is NRTS

[Jerry Pressley]

have one.  the expensive part is that funny curved fitting in the side.  cant make that very easily and it is the drain. mine is grungy so yopu will have to clean it up. as removed.  and I need the old one please.   $300.00????