Yetti Posted August 19, 2017 Report Posted August 19, 2017 Wow you printed a keyboard and a desk. Impressive 1 1
HRM Posted August 19, 2017 Author Report Posted August 19, 2017 8 hours ago, rbridges said: Cool. PLA or ABS? ABS. I recently discovered that it can print with HIPS since it has two extruders. The HIPS can be used for the support structures and then dissolved away with acetone. That little Mooney would not survive the surgery to de-structure it Anyway, the comments from you guys were kinder than the snickers I got from the undergrads. The grad students knew better. 1
rbridges Posted August 20, 2017 Report Posted August 20, 2017 Never heard of HIPS. My son tried dissolvable filament but never had good luck with it. We have a flash forge dual extruder.
Hank Posted August 21, 2017 Report Posted August 21, 2017 7 hours ago, rbridges said: Never heard of HIPS. My son tried dissolvable filament but never had good luck with it. We have a flash forge dual extruder. High Impact PolyStyrene. It's good stuff, in a bunch of colors. Not sure if the translucent colors are printable or not, but they sure mold nicely.
carusoam Posted October 17, 2019 Report Posted October 17, 2019 See if Harley is around... @HRM ^^^^ -a-
Stephen Posted October 18, 2019 Report Posted October 18, 2019 On 8/19/2017 at 2:01 AM, Raptor05121 said: I love that cup +1 P100 V100 anyone?
Seymour Posted October 18, 2019 Report Posted October 18, 2019 2 hours ago, Stephen said: +1 P100 V100 anyone? Maybe. Let me check the office collection.
HRM Posted October 18, 2019 Author Report Posted October 18, 2019 2 hours ago, carusoam said: See if Harley is around... @HRM ^^^^ -a- Always lurking...
carusoam Posted October 18, 2019 Report Posted October 18, 2019 5 hours ago, spleecho said: You gotta share the file! Just now, HRM said: Always lurking... Harley, Spleecho was asking about your 3D print file? Best regards, -a-
HRM Posted October 18, 2019 Author Report Posted October 18, 2019 7 minutes ago, carusoam said: Spleecho was asking about your 3D print file? It should be on my machine at school...I'll have to look the next time I am out there...semi-retired...so many projects, so little time. 1
HRM Posted October 18, 2019 Author Report Posted October 18, 2019 MOONEY 3D Print File Pretty sure I got it from here. 1
Steve W Posted October 18, 2019 Report Posted October 18, 2019 Don't dissolve HIPS with acetone, or your ABS model will go with it. I believe the recommended chemical is Limonene.
Recommended Posts