Jump to content

Recommended Posts

Posted

This was not my idea. I got it off Don Maxwell's website, I thought it was a great idea so I tried it and I wanted to pass it on here.

If your fuel caps are tough to get off, drop a few drops of oil from the dipstick on the shaft. It frees up those caps really nicely! No more busted fingers trying to get the caps open!

  • Like 1
Posted

The caps should be disassembled at each annual, the little internal seal replaced and the mechanism lubricated. This should avoid not only water entering but also sticky shaft problems between annuals.

 

-Robert

Posted

qty 2  010 orings per side.  take them apart and get the corrosion and gunk out of them.  Adjust them to properly open and close

Posted

Nothing, I repeat NOTHING is worse than a sticky shaft. Lubricate people, LUBRICATE...

The sexual innuendos associated with Mooney airplanes is limitless and never ceases to amaze :lol:

  • Like 3
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.