Jump to content

Recommended Posts

Posted

Hope everyone is enjoying their holiday. 

 

Anyone ever had or heard of problems with Precise Flight Electric Speed Brakes?  My left one will not remain extended during ground test (right O K), but inflight, it will work fine after cycling the switch one time.   It extends then quickly retracts.  Can't tell if its a mechanical, electrical or controller issue.  Thought someone else may have similar experiences.

 

Thanks,

Jerry

'63 M20C

Posted

Are both going down? There is an asymmetric extension box which will make them both drop if they don't extend within the programmed time.

There is a clutch in the speed brake assembly to make them drop.

There is a DC motor that drives the speed brake up and down. If the motor or gears need lubrication, it will run slow and the asymmetric box will time out and drop them.

The manual for the speed brakes say they should be lubricated annually, most are not.

Posted

Most likely needs lubrication. Cheaper option over sending it in. Watch the speed brake open on the ground, I bet it's not fully open, then pops back down? It's a safety feature. Take it to a mechanic who has experience on them and NEVER pull them out of the down position, you could damage the system.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.