DCarlton Posted March 3, 2022 Report Posted March 3, 2022 I've had my KX155 overhauled with a new display but the little On/Off Volume Knob disintegrated today. Just pieces of the knob sticking out from the faceplate. Anyone know if those can be easily replaced (pull it off and push another one on, etc)? Or does it require an avionics shop with mad skills? Thanks.
carusoam Posted March 3, 2022 Report Posted March 3, 2022 Check in with @Jake@BevanAviation he is familiar with repairing those devices… Best regards, -a- 2
N201MKTurbo Posted March 3, 2022 Report Posted March 3, 2022 The knob is held on by a tiny set screw. You either need to find the King part number for the knob and try to find one, or go on Digikey and see if you can find a set screw knob for the same shaft diameter. It won’t look quite right, but it will work just fine. 1
LANCECASPER Posted March 3, 2022 Report Posted March 3, 2022 2 hours ago, DCarlton said: I've had my KX155 overhauled with a new display but the little On/Off Volume Knob disintegrated today. Just pieces of the knob sticking out from the faceplate. Anyone know if those can be easily replaced (pull it off and push another one on, etc)? Or does it require an avionics shop with mad skills? Thanks. These might work: https://www.engravers.net/faceplate-supplies.html 1
Jake@BevanAviation Posted March 3, 2022 Report Posted March 3, 2022 @DCarlton 088-00866-0001 should be the part number for the knob. I am sure you can find some online cheaper than a new one from Honeywell. 1
Schinderhannes Posted March 3, 2022 Report Posted March 3, 2022 The knob slides off after you remove faceplate and remove the 2 screws holding the little microswitch in place. Send me your address and I mail you a replacement. 3 1
DCarlton Posted March 3, 2022 Author Report Posted March 3, 2022 1 hour ago, Schinderhannes said: The knob slides off after you remove faceplate and remove the 2 screws holding the little microswitch in place. Send me your address and I mail you a replacement. Awesome thanks! I'll message you my address.
carusoam Posted March 4, 2022 Report Posted March 4, 2022 MSer of the Day Award has been bestowed to upon SchinderHannes For supplying great details with a pic! Offering to supply spare parts is great for bonus points… Go MS! Best regards, -a- 2
DCarlton Posted March 8, 2022 Author Report Posted March 8, 2022 On 3/3/2022 at 7:42 AM, Schinderhannes said: The knob slides off after you remove faceplate and remove the 2 screws holding the little microswitch in place. Send me your address and I mail you a replacement. My KX-155 is now good as an old radio can be again. Thanks for sending the knob (and so quickly). The hardest part of the install was finding the little microscopic washer I dropped on the floor. 2 1
Recommended Posts