Need an ECI near San Carlos (KSQL)

[Mkruger2021]

Hi Everyone, Fairly new here, We recently purchased a 1965 C model. We plan on putting it in a hangar at SQL (when our name comes up). We currently have it in Stockton undergoing an annual. Does anyone know where or one who could do a ECI on a prop? I called Sullivan and they want to overhaul it......Just thought I would throw it out there.....

 

Regards....  

[OR75]

why do they want to overhaul it ? 
Did you check Stockton propeller ? used them years ago. Good shop. i have not used them recently 

[carusoam]

On 6/29/2021 at 2:16 PM, Mkruger2021 said:

Hi Everyone, Fairly new here, We recently purchased a 1965 C model. We plan on putting it in a hangar at SQL (when our name comes up). We currently have it in Stockton undergoing an annual. Does anyone know where or one who could do a ECI on a prop? I called Sullivan and they want to overhaul it......Just thought I would throw it out there.....

 

Regards....  

 

OHing a prop isn’t usually a solution to needing an ECI…

Best regards,

-a-

 

See if this thread helps any…

 

[RobertGary1]

On 7/2/2021 at 9:09 PM, OR75 said:

why do they want to overhaul it ? 
Did you check Stockton propeller ? used them years ago. Good shop. i have not used them recently 

It’s a Sullivan thing and why I avoid them. They won’t touch a prop unless they were the last to overhaul it. 

[Mkruger2021]

I spoke to CTC Services in Lincoln, CA. They are a part 145 repair station. They are good to go in my book. They will do the inspection for $150 if i bring it in to them. and 500 if they travel to Stockton. I chose to pull the prop.....I wanted to clean it up anyway and put a new seal on! Thanks for the help everyone....Fantastic resource......

[RobertGary1]

On 7/23/2021 at 8:46 AM, Mkruger2021 said:

I spoke to CTC Services in Lincoln, CA. They are a part 145 repair station. They are good to go in my book. They will do the inspection for $150 if i bring it in to them. and 500 if they travel to Stockton. I chose to pull the prop.....I wanted to clean it up anyway and put a new seal on! Thanks for the help everyone....Fantastic resource......

That is who I use. Note they are not a&ps so if you go to them hanger ferries must r&r the spinner

[carusoam]

Great pirep MK.

Thanks for sharing it…

Best regards,

-a-