Jump to content

Recommended Posts

Posted

Replaced the electric fuel boost pump today. The original motor installed in 1996 suddenly began sounding sick; slow and irregular pulsing.  Electric flap motor died 18 months ago.  Is 20 +/- years the expected useful life of these small electric motors?

CFA7ECAE-6CDB-4AB0-9896-6328F2EEB29F.jpeg

Posted

The motors should last forever. The bearings can dry up and cause problems. Most of the commutators and brushes are so over built they should last thousands of hours. 
 

If the bearings go south the motor has to work harder and could burn out the armature.

  • Like 1
Posted

Somewhere along the way... we calculated the total number of hours the flap motors and gear motors  actually run...

Its minuscule compared to trying to wear one out in a year...

:)

Best regards,

-a-

Posted

There seems to be no easy answer, some motors last amazing long lives, other relatively short ones.  Just like airplane engines I suppose.

Clarence

Posted (edited)

Those Weldon pumps only last about 300 hours in operation before the brushes wear out. They were reportedly working on a brushless motor but by the time of my retirement they hadn’t come out. (three years ago) I suspect they may never go brushless, but if they did that would pretty much eliminate motor wear as the life limit and make it pump wear, which seems to be minimal.

So how many years does it take to accumulate 300 hours at maybe 10 min per flight?

The pumps used on an S2R-H80 appear to be almost identical.

http://www.kathrynsreport.com/2019/09/loss-of-engine-power-total-thrush-s2r.html

 

Oh, and the pump in that accident was a red herring, it had nothing to do with the accident.

Edited by A64Pilot
Posted
16 hours ago, amillet said:

Replaced the electric fuel boost pump today. The original motor installed in 1996 suddenly began sounding sick; slow and irregular pulsing.  Electric flap motor died 18 months ago.  Is 20 +/- years the expected useful life of these small electric motors?

 

Not necessarily. The Mooney still senses that there's some money remaining in your wallet and wants to help relieve you of it.

  • Like 1
  • Haha 1
Posted

These Weldon pumps can and do go bad.  Usually it's the seals that go, but I had one in my E Model fail outright.  That said, they do last a long time.  They have weep valves (see picture) that tell you when the seals are going.  If there is any sign of fuel coming out of that valve, it's time to replace the pump.

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.