M20E Spinner

[corn_flake]

Does anyone know where I can find a spinner similar to the one in the picture below (New or used)?  

 

[carusoam]

Yes...

Probably about four MSers that are in the business of selling parts... 

Need a list?

Best regards,

-a-

[Hank]

These leap to mind alphabetically for parts:

@acpartswhse

@Alan Fox

@LASAR

Try our Prop Guy, @Cody Stallings He may have leads.

Also call salvage yards.

Edited May 10, 2019 by Hank

[Cody Stallings]

I would start at some salvage yards.

You have a P/N for it? Or need one?

[corn_flake]

Surprisingly, I could not identity a part number on the spinner itself.  But, based on the screw pattern, I'm fairly certain the one I have is the same as the one in the picture.  

I will send a PM to @acpartswhse.

[Alan Fox]

Call me at 856 419 5209 

[Alan Fox]

BUY ME < ALAN KEEPS ME IN HIS DUNGEON < AND I NEVER FLY>>>>>>  PLEASE 1!!!!!!

[corn_flake]

@Alan Fox  I would love to take that spinner!!  can you measure the dome's base diameter and the hights? While the screw patterns match, the one in your picture looks more pointy than mine.

Thanks

[corn_flake]

This is the actual spinner I'm trying to replace.  

The hights is 15.5" with a diameter of 12" to 13" without mounted to the bulkhead.   On a second look, it may look like @Alan Fox's spinner.  

 

[carusoam]

Flake,

it may help to state what plane/engine/prop your spinner came from...

Doing the measurements is a great way to back up the first set of details...

Best regards,

-a-

[corn_flake]

M20E with Mccauley Prop with IO360-A3B6D