Vlakvark Posted December 1, 2017 Report Posted December 1, 2017 There was an article about how to clean the plexiglass plate on the floor for gear down indicator. I cant find that. Any help. Please Quote
Vlakvark Posted December 1, 2017 Author Report Posted December 1, 2017 Thank you. Im going to open that and clean it. Quote
Vlakvark Posted December 2, 2017 Author Report Posted December 2, 2017 There was another discussion on the topic earlier this year. Can’t seem to find it though. Quote
Yetti Posted December 3, 2017 Report Posted December 3, 2017 Just screws and such. The indicator rides on a bar that connects to the gear. The indicator itself is plexiglass. Some black paint and some vinyl will make you a new one. The rivets are plastic and can be reused. Quote
TTaylor Posted December 3, 2017 Report Posted December 3, 2017 One of the best improvements you can do is get a brighter bulb. Check that the bulb you have is the correct voltage and if you can find a bright LED replacement that would be even better. Quote
Vlakvark Posted December 3, 2017 Author Report Posted December 3, 2017 Shall do. Thank you. In the post they talked about cleaning the plastic cover. Quote
Cyril Gibb Posted December 3, 2017 Report Posted December 3, 2017 11-09629 LED lamp from spruce... and make a new Lexan cover from the Home Depot aviation aisle. Really bright. Quote
jaylw314 Posted December 3, 2017 Report Posted December 3, 2017 On 11/30/2017 at 10:35 PM, TTaylor said: Wierd, when I had the MS Dark Theme, the post doesn't load, but when I changed it to default, I can Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.