Recommendations on instruments

[Bob_Belville]

4 minutes ago, xcrmckenna said:

So this is another dumb question. I'm going through my poh and I can't find the service ceiling for the 201. Google says its 18,000. But wanted to make sure I get the right altimeter as well. The ASI I'm getting has the markings painted onto the dial. I was wrong that my poh has the speeds listed in mph and knots on the indicator marking page. It's only in MPH. The stall speeds and cruise charts in the poh has mph and knots. So I would probably have to keep the ASI in mph at least.

 

Pull up this document and scroll down to your model. In my case the Airspeed limits are listed in MPH with knots are in parenthesis which I and Lynn take to mean an ASI marked in knots is acceptable. My ASI is marked in both. 

http://rgl.faa.gov/Regulatory_and_Guidance_Library/rgMakeModel.nsf/0/6ee01384f2e646e986258100005b0b61/$FILE/2A3_Rev57.pdf

[Bob_Belville]

Just now, Marauder said:

 

Bob - Vso is the bottom of the white arc and Vs is the bottom of the green arc. Based on the pictures you are showing, it looks like Vso is 63 MPH (54.7 KIAS) and Vs is 70 MPH (60.8 KIAS).


Sent from my iPad using Tapatalk Pro

 

Yup. so my ASI is correct.

This is a useful document:

http://rgl.faa.gov/Regulatory_and_Guidance_Library/rgMakeModel.nsf/0/6ee01384f2e646e986258100005b0b61/$FILE/2A3_Rev57.pdf

[Marauder]

Yup. so my ASI is correct.
This is a useful document:
http://rgl.faa.gov/Regulatory_and_Guidance_Library/rgMakeModel.nsf/0/6ee01384f2e646e986258100005b0b61/$FILE/2A3_Rev57.pdf

Link doesn't appear to be working.


Sent from my iPad using Tapatalk Pro

[Bob_Belville]

2 hours ago, Marauder said:

 

Link doesn't appear to be working.


Sent from my iPad using Tapatalk Pro

 

Works for me. Try this one and use index to find Mooneys 

http://rgl.faa.gov/Regulatory_and_Guidance_Library/rgMakeModel.nsf/MainFrame?OpenFrameSet

[Bob_Belville]

2 hours ago, Marauder said:

 

Link doesn't appear to be working.


Sent from my iPad using Tapatalk Pro

 

Or try this link. Same document older rev. they're up to Rev 57 with the M20U and M20V- TCDS 2A3. (Type Certificate Data Sheets) 

Scroll down to page 22 for your F.

http://67m20e.com/Mooney TCDS 2A3 Rev 52 dtd 9DEC10.pdf

[carusoam]

That's odd... links are working for me.

Is that the TCDS document for the M20 Series?

It doesn't use TCDS anywhere I could see...

Best regards,

-a-

[Bob_Belville]

8 hours ago, carusoam said:

That's odd... links are working for me.

Is that the TCDS document for the M20 Series?

It doesn't use TCDS anywhere I could see...

Best regards,

-a-

Anthony, here's the directory page that leads to that document. It is headlined as Type Certificate Data Sheets

http://rgl.faa.gov/Regulatory_and_Guidance_Library/rgMakeModel.nsf/Frameset?OpenPage

 

 

@Marauder you might want to try a different browser. I can never open @mooneygirl's AOPA essays on my PC with my default browser but I discovered that my phone and another browser on the PC worked fine. Way over my paygrade.

[Marauder]

Anthony, here's the directory page that leads to that document. It is headlined as [mention=9886]Marauder[/mention] you might want to try a different browser. I can never open [mention=6913]mooneygirl[/mention]'s AOPA essays on my PC with my default browser but I discovered that my phone and another browser on the PC worked fine. Way over my paygrade.

 

I had to use a different browser as Bob pointed out. Thought the usual standing on one leg chanting "MooneySpace, MooneySpace" while waving the mouse over the keyboard might work. It didn't, just took me to a website with fat women pictures on it.

 

 

Sent from my iPhone using Tapatalk Pro