Hank Posted September 17, 2020 Report Posted September 17, 2020 14 hours ago, carusoam said: The fuel being burned is a good direct indication of how fast you will be moving... When deep ROP a couple gph get used for cooling and don’t add to the translation.... Over the ground... If you want to go fast... there is no substitute for burning fuel... Typical fuel burn of an M20C 10gph and 150mph... or so... from old memories. Boosting the MP, but keeping the FF artificially low via mixture... is interesting... but not a way to go fast... Sure there are cook book reasons to include prop design, TIT, and intercooler outlet temps... But don’t lose sight of the fact it takes fuel to generate speed... no matter how efficient a TC’d Mooney actually is... The actual efficiency of the TC’d Mooney really shines in the FLs... it isn’t all that good at NA altitudes... Best regards, -a- I can coax 160+mphi from my C at 1200-1300 msl [1000 agl around here], but no fuel flow installed. I generally get around 9 gph block time [fuel pump to fuel pump] traveling 7500 msl and up, running ROP. Generally 145 mphi or ~147-148KTAS. Not too bad for 180hp and a carburetor. All 201 / 231 / 252. etc., should easily exceed these speeds on less fuel. Quote
Tx_Aggie Posted September 20, 2020 Author Report Posted September 20, 2020 Glad to see this thread resurrected. Ended up picking up a 1980 M20J and love it! Useful load is on the lower end. But took the copilot seat out and it’s become our preferred means of traveling for a small family of 3, bags and all! Thanks for all the help here! 1 Quote
jrwilson Posted September 24, 2020 Report Posted September 24, 2020 9,500'/28"/2500 RPM Full fuel but only two people on board so about 150 under gross. Sorry about the sideways pictures. Maybe I was in a steep turn? Quote
gsxrpilot Posted September 24, 2020 Report Posted September 24, 2020 This is from a flight yesterday for me. You can see I'm LOP at 9.5 gph and only 62% power. I'm also up at 15,000 ft. Anyway, I've got hundred of these pictures from all types of power settings, altitudes, etc. 1 Quote
PJClark Posted September 24, 2020 Report Posted September 24, 2020 A quick 180 nm run up to Cleveland yesterday at 9,000 MSL. A Rocket is not "efficient" at 17-19 gph, 65% power, 30" and 2300 rpm, but it is wicked fast...which is just plain fun. My UL is about 920. 2 Quote
carusoam Posted September 24, 2020 Report Posted September 24, 2020 JRW’s panel... Does the Aspen always show a descent? That might be asking for a calibration button push... Best regards, -a- Quote
jrwilson Posted September 24, 2020 Report Posted September 24, 2020 35 minutes ago, carusoam said: JRW’s panel... Does the Aspen always show a descent? That might be asking for a calibration button push... Best regards, -a- Nope...that’s why I had 166 ktas ;). Autopilot was doing a slight correction. Picture right before was 165 and level 1 Quote
flyer338 Posted September 25, 2020 Report Posted September 25, 2020 I am glad this thread has been resurrected. It is interesting to see the differences between models and individual examples of the same model. My 1983 J left the factory with 916 lbs. of useful load. That was its best day. At present the useful load is 898 lbs. At the moment it is in the shop to have the legacy HSI and AI removed to be replaced by glass. The vacuum system is going away as well. I think that just may get me somewhere close to the original useful load. Down the road, I am considering a MT propeller (8.3 lbs. reclaimed) and a smooth belly (about 5 lbs.). It would be nice if the lighter weight lithium batteries were certified because that would net about 15 lbs. more. A useful load of 950 leaves 558 for people and bags with full fuel. With three hours and reserve, the P&B number improves to almost 700 lbs. Quote
ArtVandelay Posted September 25, 2020 Report Posted September 25, 2020 78 J, 998UL ... next upgrade should put me over a 1000. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.