Piloto Posted April 30, 2014 Report Posted April 30, 2014 The glass on my altimeter and airspeed indicator looks foggy even after been in the hangar for two weeks. The VSI however is clean. Does anyone knows of a trick to get rid of the fog? I would hate to take them to the shop just to clean the glass. José Quote
N201MKTurbo Posted April 30, 2014 Report Posted April 30, 2014 If the hanger fairies take the instruments apart and clean the glass and put it back together it will look great! If you do this with your altimeter just before your IFR cert, the cert will make it all legal again... Just saying... I have found that most instrument shops will clean the glass for about $60. 1 Quote
Ron McBride Posted April 30, 2014 Report Posted April 30, 2014 When mine did this, the Altimeter went out within 2 hours. Ron Quote
DonMuncy Posted April 30, 2014 Report Posted April 30, 2014 If the hanger fairies take the instruments apart and clean the glass and put it back together it will look great! If you do this with your altimeter just before your IFR cert, the cert will make it all legal again... My hangar elf has been reluctant to attack an ASI. Is this doable for a reasonably talented elf. Quote
jezzie Posted April 30, 2014 Report Posted April 30, 2014 I had a foggy VSI in my J model before I redid the panel. A hangar elf did remove the 8 small screws and while doing this, one of the screws had a small piece of whatever the manufacturer puts on to see if the instrument has been tampered with. The hangar elf removed the glass and cleaned it, put it all back together and the VSI looks same as original except for the small white piece of goop on one of the screws. This particular VSI has not been returned back to service as I did not need it as a back up to the G500. From all indications this VSI would still work as intended. If nobody needs a used VSI it will just sit on a shelf as a momento . Quote
N201MKTurbo Posted April 30, 2014 Report Posted April 30, 2014 If the hanger fairies take the instruments apart and clean the glass and put it back together it will look great! If you do this with your altimeter just before your IFR cert, the cert will make it all legal again... My hangar elf has been reluctant to attack an ASI. Is this doable for a reasonably talented elf. Yes. Quote
flyboy Posted April 30, 2014 Report Posted April 30, 2014 I had a foggy VSI in my J model before I redid the panel. A hangar elf did remove the 8 small screws and while doing this, one of the screws had a small piece of whatever the manufacturer puts on to see if the instrument has been tampered with. The hangar elf removed the glass and cleaned it, put it all back together and the VSI looks same as original except for the small white piece of goop on one of the screws. This particular VSI has not been returned back to service as I did not need it as a back up to the G500. From all indications this VSI would still work as intended. If nobody needs a used VSI it will just sit on a shelf as a momento . Some super technical elves would call the goop torque stripe, but most elves know it by its common name "bird,s...t" This stuff can be acquired by strategic elves. Elves have been thought to adjust a VSI to read 0 on the ground with the adjustment screw, but there is little proof that this actually happened. Quote
ArtVandelay Posted April 30, 2014 Report Posted April 30, 2014 The glass on my altimeter and airspeed indicator looks foggy even after been in the hangar for two weeks. The VSI however is clean. Does anyone knows of a trick to get rid of the fog? I would hate to take them to the shop just to clean the glass. José What is causing the fog? I assume it's not moisture. Quote
N201MKTurbo Posted April 30, 2014 Report Posted April 30, 2014 Both the altimeter and airspeed have outside air plumbed into their cases. The crud can be just about anything including lubricant and paint vapors from the instrument itself. 30 years of smog moving in and out of the instrument could cloud up anything. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.