HRM Posted May 26, 2020 Report Posted May 26, 2020 OK, so there's a different hangar thread about what you need in a hangar, this is for what you find in them. My 'new' (to me) hangar was full of god-knows-what because the PO died three years before his widow sold the house. After her (grown) kids took what they wanted, and none of them were aviators, she left the rest. I have scored a lot of good 'junk' not to mention enough rivets to build an airplane, clecos too! Occasionally as I work through everything I stumble on things that I have no idea what they are. Keep in mind that this includes stuff not only from aviation. OK, anybody know what this is? Quote
Nick Pilotte Posted May 26, 2020 Report Posted May 26, 2020 Flip it around and get a couple pictures of the wrench head, one from this side and one from the other. I know I’ve seen that somewhere before but I have no idea why it’s U shaped. Quote
carusoam Posted May 26, 2020 Report Posted May 26, 2020 That is A hangar hanger.... fashioned from other parts... like a battery cable... (the teeth bight into the soft lead) its repurposing, left the teeth in an un harming position... What it was used for was to hang a... (fill in the blank) PP WAG only, what else ya got in there? I need to remember to clean out my junk drawer before becoming unable... Best regards, -a- 1 Quote
RLCarter Posted May 26, 2020 Report Posted May 26, 2020 I say it was something he needed, and from the looks of it he used it a lot Quote
HRM Posted May 26, 2020 Author Report Posted May 26, 2020 37 minutes ago, Nick Pilotte said: Flip it around and get a couple pictures of the wrench head, one from this side and one from the other. I know I’ve seen that somewhere before but I have no idea why it’s U shaped. It is a wrench of some sort, like you, I think I have seen one before, but I can't remember either. 4 minutes ago, RLCarter said: I say it was something he needed, and from the looks of it he used it a lot THAT'S what's bothering me. Is it for something critical on the property, or was it for one of his airplanes. He had a Piper at one point and then later a Cessna. Keep in mind that this guy loved electricians tape--he wrapped every handle he touched with it. Also, his oldest boy was into cars, found a lot of car stuff, so this could be automotive. They also had a boat, so it could be marine. Let's face it, a hangar is just a huge garage for an airplane, but that does not mean that the other toys can't coexist with it Quote
carusoam Posted May 26, 2020 Report Posted May 26, 2020 Marine use... that would be a life ring holder/bracket... Proper dimension, Holds the ring in place, ready to use... People born in the 30s liked electrical tape used around tool handles.... in the 70s... PVC was better than wood... for the interface.... in this case... PVC was good for not scratching things... it also gave things a nice shiny black surface instead of an old rusty look... Best regards, -a- 1 Quote
Nick Pilotte Posted May 26, 2020 Report Posted May 26, 2020 I think I’ve got it. We have an old Laister sailplane at my Dad’s house. I “think” that that wrench head was used to tighten or a fix wings together in the fuselage for assembly. It looks like this one is modified to wrap around a leading edge a little, maybe for a one person assembly job. I’m probably wrong but I swear I saw that kind of tool in the tool kit that is in the trailer. Quote
RLCarter Posted May 26, 2020 Report Posted May 26, 2020 Hangars tend to be a catch all, as one moves out they tend to leave things that are no longer wanted. I’ve been in my hangar for 8 or so years (owned it for 2+ yrs). A lot of stuff was thrown out over the years and there is still crap that I have no idea who’s it was Quote
HRM Posted May 26, 2020 Author Report Posted May 26, 2020 10 hours ago, carusoam said: Marine use... that would be a life ring holder/bracket... Certainly a workable theory for the handle part, but the wrench itself is what I am wanting an ID on. 9 hours ago, Nick Pilotte said: I think I’ve got it. We have an old Laister sailplane at my Dad’s house. I “think” that that wrench head was used to tighten or a fix wings together in the fuselage for assembly. It looks like this one is modified to wrap around a leading edge a little, maybe for a one person assembly job. I’m probably wrong but I swear I saw that kind of tool in the tool kit that is in the trailer. Interesting theory, but I am fairly sure there was not a sailplane in the history of the hangar. It is absolutely a wrench of the kind not unlike the spanners used to remove the backs of high-end watches (Breitling, Rolex, etc.), but this one has 10 teeth. Quote
HRM Posted May 26, 2020 Author Report Posted May 26, 2020 OK, it's a bung wrench. My guess now is that a fuel tank plug in the wing was a bung nut. Quote
HRM Posted May 26, 2020 Author Report Posted May 26, 2020 11 minutes ago, philip_g said: I don't understand how we got from the pic above to a bung wrench It may also be called a "plug wrench". The plug (or bung for that matter) is basically a threaded disk that seals a hole in a container. The disk has holes in it that the wrench engages with its teeth, so basically you have a flat profile when the container (a wing tank) is sealed. Quote
N201MKTurbo Posted May 26, 2020 Report Posted May 26, 2020 Maybe it is for hooking or unhooking the clips on bladder tanks. Quote
tmo Posted May 26, 2020 Report Posted May 26, 2020 2 hours ago, philip_g said: I don't understand how we got from the pic above to a bung wrench The wrench in question is an integral part of the contraption in the picture, I believe. Held together with electric, not duct, tape. Quote
N201MKTurbo Posted May 26, 2020 Report Posted May 26, 2020 Barrels have a 2" bung and a 3/4" bung. The device in the original post is much smaller than the 2" bung and the small bung uses a 1/4 inch slot to remove it. Quote
GeeBee Posted May 26, 2020 Report Posted May 26, 2020 My guess is it was used to tighten a B nut on something that had a rod or wire coming through it. The dogs either fit in indentations on the nut face or engage the nut sides and the U clears the item coming through. The oddly shaped handle is because clearance was close and this allowed manipulate of the wrench clear of the panel. Quote
steingar Posted May 26, 2020 Report Posted May 26, 2020 Dunno, but I think I got walloped with one when I was a kid. 1 Quote
Mcstealth Posted June 1, 2020 Report Posted June 1, 2020 Isn't there a picture around here of a wrench used to tighten the hard to get to back side bolt of the starter/mag/fuel pump/etc,etc? 1 Quote
HRM Posted October 11, 2021 Author Report Posted October 11, 2021 (edited) Hah, finally found out what it is…. Edited October 11, 2021 by HRM Add photo. Quote
N201MKTurbo Posted October 11, 2021 Report Posted October 11, 2021 39 minutes ago, HRM said: Hah, finally found out what it is…. They used to use those on amateur night at the vaudeville theatre. What do you use it for? 1 Quote
N201MKTurbo Posted October 11, 2021 Report Posted October 11, 2021 1 hour ago, HRM said: Hah, finally found out what it is…. BTW, How do you get your plane through that little bitty hangar door? Quote
HRM Posted October 11, 2021 Author Report Posted October 11, 2021 1 hour ago, N201MKTurbo said: What do you use it for? Came with the hangar...and at one time belonged to ConEd. The PO was an electrical crew chief of some sort. I have enough stuff in the hangar to rewire the local grid. 1 Quote
HRM Posted October 11, 2021 Author Report Posted October 11, 2021 1 minute ago, N201MKTurbo said: BTW, How do you get your plane through that little bitty hangar door? I was tempted to say 'folding wings', but that's the 'back' door (house side), here's the other side: 1 Quote
HRM Posted October 23, 2021 Author Report Posted October 23, 2021 OK, what's this? The rod, not the pucks. Quote
N201MKTurbo Posted October 23, 2021 Report Posted October 23, 2021 (edited) It looks like it has a label on the top thingy. How about some closeups of that? Edited October 23, 2021 by N201MKTurbo Quote
HRM Posted October 23, 2021 Author Report Posted October 23, 2021 1 minute ago, N201MKTurbo said: How about some closeups of that? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.