chan65 Posted March 3, 2018 Report Share Posted March 3, 2018 I’m pulling engine on 79 201 at the same time I’m going to seats recovered by local upholstery shop, and replace interior panels, I’ve found plastic, but interested what seat material might be suggested, I could do about anything but unsure vinyl/ vs leather /vs cloth, any input is appreciated. also my option are rebuild from Phil’s in Ohio, reputable shop Signature uses them, 20k+\- or fact remain for 30? Resale and longevity are main concerns , both come with new cylinder and mags etc Quote Link to comment Share on other sites More sharing options...
Hank Posted March 3, 2018 Report Share Posted March 3, 2018 Signature overhauled my engine for the last owner in 2001. Its been pretty good since I bought her in '07. 1 Quote Link to comment Share on other sites More sharing options...
Yetti Posted March 4, 2018 Report Share Posted March 4, 2018 Why are you pulling it? Making metal? Low compression? Leather. Search for three leather hides. I think the only thing I would do different is better foam. 1 Quote Link to comment Share on other sites More sharing options...
LANCECASPER Posted March 4, 2018 Report Share Posted March 4, 2018 4 hours ago, chan65 said: I’m pulling engine on 79 201 at the same time I’m going to seats recovered by local upholstery shop, and replace interior panels, I’ve found plastic, but interested what seat material might be suggested, I could do about anything but unsure vinyl/ vs leather /vs cloth, any input is appreciated. also my option are rebuild from Phil’s in Ohio, reputable shop Signature uses them, 20k+\- or fact remain for 30? Resale and longevity are main concerns , both come with new cylinder and mags etc You don't have to replace the plastic. It can be repaired and painted with SEM plastic paint or covered with ultra leather. Do some searches on Mooneyspace with those two words and you'll see what others have done. 1 Quote Link to comment Share on other sites More sharing options...
chan65 Posted April 20, 2018 Author Report Share Posted April 20, 2018 thanks for responses, the engine is at 4044 last oh 1864, 2180 SMOH, in September 1992. Oil tests are good still, flying it weekly. I know its up there, but Im training in this plane amd it runs good. Have been advised to let it go, till using more than a qt/ for 4 hrs flying. 1 Quote Link to comment Share on other sites More sharing options...
KSMooniac Posted April 20, 2018 Report Share Posted April 20, 2018 I'd be inclined to keep flying as well if all is good now. Adhere to 500 hr mag inspections, though. Check your filter at every change and borescope your valves at every annual. Reviewing engine monitor data is of course also recommended.Nothing beats the smell of nice leather. It is heavier, though, if weight & useful load are a concern. The modern vinyls like ultraleather and similar are very nice, much lighter and durable without the old hot sticky feeling like vintage vinyl. Wool or other cloth materials can be very nice and breathe much better. Sheep skin inserts are also a great option. It all depends on your desires and budget.FWIW, I have some neutral tan aircraft leather hides for sale that I got from a bizjet interior surplus sale. I can send a sample if there is interest.Sent from my LG-US996 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.