Gasolator gasket part #

[dcrogers11]

Does anyone have a part # for the gascolator gasket on a 64 M20C?

Thanks,

Don

Edited February 10, 2016 by dcrogers11

[1964-M20E]

http://www.brownaircraft.com/default.asp

 

Go to Brown Aircraft Supply and ask for the GL-30-HD but cut from 1/16" thick material  that is if it is the same one that is on the E and F models.

the stock GL-30-HD  is 2"O.D. x1/8" and is too thick.

Brown is very reasonable on the price.  Order 2 or 3 so you will be ready for the next annual as well.

 

 

[dcrogers11]

1 minute ago, 1964-M20E said:

Thanks!

Don

 

http://www.brownaircraft.com/default.asp

 

Go to Brown Aircraft Supply and ask for the GL-30-HD but cut from 1/16" thick material  that is if it is the same one that is on the E and F models.

the stock GL-30-HD  is 2"O.D. x1/8" and is too thick.

Brown is very reasonable on the price.  Order 2 or 3 so you will be ready for the next annual as well.

 

 

 

[MB65E]

Dan at lasar will have them too. 

Maybe Browns price is better than lasar's. $35 at lasar...

-Matt 

[Yetti]

I had saved this link.  http://www.brownaircraft.com/product_p/gl-30-hd.htm

But I guess thinner?

[1964-M20E]

13 hours ago, MB65E said:

Dan at lasar will have them too. 

Maybe Browns price is better than lasar's. $35 at lasar...

-Matt 

Much cheaper around $10+/-

 

 

[1964-M20E]

13 hours ago, Yetti said:

I had saved this link.  http://www.brownaircraft.com/product_p/gl-30-hd.htm

But I guess thinner?

Yes you need to ask them to cut it from 1/16" material.

 

 

[moodychief]

You didn't hear it from me but I was once told it is the same one used on the early 60s John Deere tractors.