Looking for J model spinner

[larryb]

A couple of the screws that hold the spinner on are wearing through the spinner. There are no cracks or anything like that. I talked to my shop today about it, and the feeling is that I should be looking for a replacement. It's not critical today, but eventually will be. They are going to look into the cost and leadtime of a new unit. I thought I'd ask here if anybody has one for sale.

 

Thanks, Larry

[HRM]

On my E there is a nylon washer under each screw. Are you sure you aren't missing those?

[larryb]

The washers are there, although some of those are worn thin too, and will be replaced shortly. I did check a few other airplanes nearby and found a similar condition on several.

[Dale Logsdon]

ASEI,Inc repairs spinners and may be able to repair yours. 404-5591946

[johnmaher]

I have one in my hangar in Fla. it is polished and in good condition. Smallish problem is that I will not be in the US until the middle of June, if you can wait.

[larryb]

johnmaher:  Yes, I am interested. PM sent.

 

Larry

[KSMooniac]

Larry, if your original/damaged spinner ends up being surplus to you and not usable, I'd be interested in purchasing it for a modest sum for mock-up purposes down the road.

[LT4BIRD]

I have one painted if the first doesn't work out.

[andrem]

Hi guys, I also need one, but slightly more urgently. Any available now?

[joemorelli]

I have one, white, from an M20K, 1979.  If that works for you let me know.

[johnmaher]

I have a polished spinner still.

JM