Jamildmc Posted January 15 Report Posted January 15 Guys, does the V band clamp AD apply to a Ray Jay? It’s on my 1965 C model. Thanks. Sent from my iPhone using Tapatalk
N201MKTurbo Posted January 15 Report Posted January 15 The last version of the AD included my M20 Turbo. I think they got yours too. The up side is the clamp is readily available and less than $500.
markgrue Posted January 15 Report Posted January 15 If it is the spot welded clamp with 500 or more hours on it then it applies. Take a look at the AD for more information.
M20F Posted January 15 Report Posted January 15 Was applicable on my 67F, believe it is 500hrs or inspection but there is an AD. I had mine replaced last annual due to time.
stevesm20b Posted January 16 Report Posted January 16 21 hours ago, N201MKTurbo said: The last version of the AD included my M20 Turbo. I think they got yours too. The up side is the clamp is readily available and less than $500. Where can you get the clamp for less than $500?
N201MKTurbo Posted January 16 Report Posted January 16 https://rajay.aero/products/coupling-v-band-45-50lbs 1
N201MKTurbo Posted January 16 Report Posted January 16 15 minutes ago, stevesm20b said: Where can you get the clamp for less than $500? That clamp is only legal on the RaJay STCs. It is not legal on your M20K. My STC specifies the RJ0193 clamp.
N201MKTurbo Posted January 16 Report Posted January 16 So, my STC uses a 231 turbo, exhaust pipe and wastegate. So, would the RJ0193 clamp work on a 231? Absolutely, is it legal? No.
N201MKTurbo Posted January 16 Report Posted January 16 It probably wouldn’t be too hard to get an STC through to use the RJ0193 clamp on a 231.
Recommended Posts