SCAT/SCEET Duct Source?

[TangoTango]

Hi all, I am the proud new owner of a 1993 M20J. In the process of getting to know her, I found this 

I reattached the SCAT duct, but it's pretty ratty. I think it's time to just go through and replace all of them under the cowl.

I found this thread, but I cannot get either link mentioned to work. Is Gee-Bee Aeroproducts still making finished SCEET hoses? I also see customducts.net mentioned here as the successor to Jonathan Kinney. That link also doesn't work, but there's a website here by the same name.

Obviously I could just go to Aircraft Spruce and order some regular ole SCAT duct, but I'd like to know what everybody else is using, and maybe I can find something more durable.

Thanks!

Edited February 4 by TangoTango

[Gee Bee Aeroproducts]

I have all versions in stock

1977

1978 on up

Later version  MSE

 

lined clamps

2” finished ends 

Black sceet

Edited February 4 by Gee Bee Aeroproducts

[dkkim73]

@Gee Bee Aeroproducts Those look really slick. I was considering have the SCAT tubing replaced (by SCEET, similarly) during my upcoming annual this month. At least one SCAT tube had fallen apart on the initial annual last year, and I was thinking it would not hurt with my intermittent CO leaks to replace at least the heat and vent tubing. 

Do you have the specs/measurements for a set for the M20TN (type S if it matters)? 

 

[Gee Bee Aeroproducts]

4 minutes ago, dkkim73 said:

@Gee Bee Aeroproducts Those look really slick. I was considering have the SCAT tubing replaced (by SCEET, similarly) during my upcoming annual this month. At least one SCAT tube had fallen apart on the initial annual last year, and I was thinking it would not hurt with my intermittent CO leaks to replace at least the heat and vent tubing. 

Do you have the specs/measurements for a set for the M20TN (type S if it matters)? 

 

 

3 minutes ago, dkkim73 said:

@Gee Bee Aeroproducts Those look really slick. I was considering have the SCAT tubing replaced (by SCEET, similarly) during my upcoming annual this month. At least one SCAT tube had fallen apart on the initial annual last year, and I was thinking it would not hurt with my intermittent CO leaks to replace at least the heat and vent tubing. 

Do you have the specs/measurements for a set for the M20TN (type S if it matters)? 

 

I have all versions in stock

1977

1978 on up

Later version 

 

lined clamps

2” finished ends 

Black sceet

[Gee Bee Aeroproducts]

It’s best to measure the I.d. Of the duct or the joining flange.

Then the length end to end

We Can mfg in a week or so

Please use blue or white silicone adel clamps , not tyrap to secure.

n77gb@msn.com

we just finished some 1.5 x 64 long defrost ducts .

My cross weave design gives the flex as scat single wall .

Were double wall sceet 

Were the only mfg that can mfg 3” or 6” elbow drops .

[buddy]

I used Custom Ducts (customducts@gmail.com) 603-239-2345 last year and they did a great job.

[Gee Bee Aeroproducts]

17 hours ago, buddy said:

I used Custom Ducts (customducts@gmail.com) 603-239-2345 last year and they did a great job.

They don’t mfg there ducts

they buy a roll and tape on the ends 

You must have a autoclave to produce assys .

Do they supply Aerospace clamps ?

There is a difference when you can provide certs with your product.

Compare quality between products 

 

Good luck with that

 

[hypertech]

I have used both custom ducts and geebee.  Nothing wrong with custom ducts - the product is exactly as they say.  But I think Geebee's are a bit better quality and I prefer them (also I like the black look).  Also ship fast.

[Slick Nick]

@Gee Bee Aeroproducts do your ducts come with 8130’s? 

[Gee Bee Aeroproducts]

Not required as the product is made to your specifications.

Certification of conformance is required to tso / oem holders per there print .

We have sold thousands of feet in various specs to the Airforce as were the only mfg that can do elbows with 3” or 6 “ drop 90 elbow .

General aviation piston won’t pay the price for elbows.

 

[Slick Nick]

15 hours ago, Gee Bee Aeroproducts said:

Not required as the product is made to your specifications.

It sure as heck is required here in Canada. At least a CoC stating that they're made to meet or exceed OEM specifications, or else nobody is going to be able to install them here.

I like your workmanship, and I'd like to put these on my plane, but no Canadian mechanic will touch them without the proper paperwork.

Edited Friday at 03:56 PM by Slick Nick

[Gee Bee Aeroproducts]

Sold with certs 

only way to get 8130 is to purchase through mooney .

I sell too many shops per there I.d. And length all over the world.

And various mooney shops 

Check with your mechanic about 

ac43.13

m20 overhead vents 

homemade non finished ends vs finished ends