2 x gi 275 install pricing

[NewMoon]

Looking to add 2X 275's to an Ovation panel. Has gtn 750 and 225 ap. Any idea of cost? Anyone done it recently?

[alextstone]

Take the price of both units and then double that and you will be in the ballpark

[Tommooney]

I am interested too.

 

Anyone have recommendations on a couple shops on West Coast?

 

Thanks

[NewMoon]

6 hours ago, alextstone said:

Take the price of both units and then double that and you will be in the ballpark

ok, appreciate the macro estimate 

[Max Clark]

What about EIS?

[Aerodon]

14 minutes ago, Max Clark said:

What about EIS?

Max,

I've installed several EDM900's and figure about 30-50 hours.  Sometimes it can take a lot of time cleaning up previous installations removing OEWM transducers, getting new hoses for pressure instruments etc.  And depends what else is happening, to make it easier or more difficult.  If the cowls are off and the instrument panel side does not require a lot of modification it makes it quicker.

There are some things I like about a GI-275, wider selection of transducers, ability to set and change your own alarm limits.  Smaller footprint also helps but makes it harder to see numbers.

I think a GI-275 for flight instruments is a dealer install, I think the engine or MFD is an IA install?   

Don

 

 

 

 

 

 

[00-Negative]

On 5/19/2024 at 9:34 AM, NewMoon said:

Looking to add 2X 275's to an Ovation panel. Has gtn 750 and 225 ap. Any idea of cost? Anyone done it recently?

I got a quote for this on 12/14/23 asking with the GI-275 EIS, and GFC500. The 2x GI-275s flight instruments were quoted at $12k for purchase and installation. The GI-275 EIS was $12k. The GFC500 was $27k. 

-David

[NewMoon]

58 minutes ago, 00-Negative said:

I got a quote for this on 12/14/23 asking with the GI-275 EIS, and GFC500. The 2x GI-275s flight instruments were quoted at $12k for purchase and installation. The GI-275 EIS was $12k. The GFC500 was $27k. 

-David

ok, appreciate the info