GNS530W Stack with Approach Fast Stack Hub and cables

[Aerodon]

I collect too much stuff in case I have a project to use it on.  For those not familiar  www.approachfaststack.com  make a nice hub and spoke system for wiring up avionics that can really speed things up.  Especially useful if you have the skills to assist with the installation.

Mooneys have limited vertical space in their panels, so here is a mostly new system that would make a very neat installation in an older Mooney.

Pro-G Hub, SL15 / PS7000 audio panel, GNS430/530, SL30 NavCom, GTX327 transponder, Transcal encoder, MD200 indicators. You do not need to take all the cables, and I will help figuring out all the components you might need.

The system is well documented, so it is easy to wire devices like an EDM700 engine monitor into the Hub so that it sends and receives fuel flow information.

It's hard to schedule time to do an avionics installation, and if you are not buying a $50k plus stack it is even harder.  This is a way of getting a 'drop in' ready stack to minimize installation costs.

Aerodon

 

 

 

[charlesual]

Think I might be interested in this. If you’re able to contact me on Monday. I’m at 303-246-0644.
Thanks, Charlie


Sent from my iPhone using Tapatalk

[walkinghispath]

Sending PM

[Aerodon]

I now have all the avionics to go with this, so if you need a good IFR stack to fit into a single stack in a Mooney, this is the way to go.

SL15 audio 1.3"

GNS530 4.6"

SL30 Nav/Com 1.3"

SL70 Transponder 1.3"  or GTX327 1.6"

Total height 8.5"

MD200-306 indicator for SL30

GI-275 for GNS530  (A G5 will work, but then you need a GAD29B to interface with the GNS530.  Extra time to install, extra space needed.

Aerodon