**FOUND** - Inspection Cover Assembly 210113-1

[pilot_jb]

SUCCESS!

1967 M20F.  This is the inboard and forward most oval inspection cover that is two piece construction with seven (7) screws.  Must have the nut plates attached.  Thanks!

 

 

[Guest]

  On 5/26/2022 at 2:05 PM, pilot_jb said:

1967 M20F.  This is the inboard and forward most oval inspection cover that is two piece construction with seven (7) screws.  Must have the nutplates attached.  Thanks!

Expand  

While many of us are good, we’re not psychic.  Where does this panel go?  There are many that could meet your description.

Clarence

[carusoam]

See if @Alan Fox has a stack of them…

-a-

[pilot_jb]

  On 5/26/2022 at 10:08 PM, M20Doc said:

While many of us are good, we’re not psychic.  Where does this panel go?  There are many that could meet your description.

Clarence

Expand  

As stated, it’s the inboard and forward mist inspection plate. Under the wing behind the leading edge but in front of the tank.  There’s two on the plane like this; one on each side. These two are two-piece construction and are the only inspection plates made this way. Someone way before my time fabricated one from a flat piece of aluminum and I want to make it right. 

[N201MKTurbo]

You just need to find a good sheetmetal guy. We have a few mobile ones around here who work full time for the airlines during the day and do sheetmetal for GA on the side. They may use the airline’s equipment on occasion. They could make one that fit perfect in short order.

[Guest]

From the IPC, I come up with a different part number.  But under the new website I can’t post the pages anymore.  Ah progress!

Clarence

[mooniac58]

  On 5/27/2022 at 12:51 AM, M20Doc said:

From the IPC, I come up with a different part number.  But under the new website I can’t post the pages anymore.  Ah progress!

Clarence

Expand  

4 days ago I doubled the storage for all members (500MB for Supporters).  I show you have 250MB available.  If you are not able to post some pages they must be a huge file.  How large is the PDF you are trying to send?

[Guest]

  On 5/27/2022 at 1:52 PM, mooniac58 said:

4 days ago I doubled the storage for all members (500MB for Supporters).  I show you have 250MB available.  If you are not able to post some pages they must be a huge file.  How large is the PDF you are trying to send?

Expand  

Just a screen shot of the IPC on my iPad. Possibly a formatting issue?

Clarence

[Shadrach]

  On 5/27/2022 at 4:22 PM, M20Doc said:

Just a screen shot of the IPC on my iPad. Possibly a formatting issue?

Clarence

Expand  

 

  On 5/27/2022 at 1:52 PM, mooniac58 said:

4 days ago I doubled the storage for all members (500MB for Supporters).  I show you have 250MB available.  If you are not able to post some pages they must be a huge file.  How large is the PDF you are trying to send?

Expand  

Apple IOS now defaults to HEIF/HEVC format for images because they are smaller.  That format does not seem to be either allowed or compatible with forum software.  I believe you can change it under Settings>Camera  

[mooniac58]

Are you able to tell me what the file extension is?  For example .JPEG, .JPG, .GIF, .PNG, etc?

[Fly Boomer]

  On 5/28/2022 at 2:01 AM, mooniac58 said:

Are you able to tell me what the file extension is?  For example .JPEG, .JPG, .GIF, .PNG, etc?

Expand  

Slightly off topic, but I have suddenly developed issues with JPG drag-and-drop.  I can still attach, and it ends up looking about the same, but drag-and-drop was easier.

[mooniac58]

  On 5/29/2022 at 1:22 AM, Fly Boomer said:

Slightly off topic, but I have suddenly developed issues with JPG drag-and-drop.  I can still attach, and it ends up looking about the same, but drag-and-drop was easier.

Expand  

I just tested dragging and dropping a JPG and it worked.  I did this from a Windows PC.  Not sure what platform you are using...

[Fly Boomer]

  On 5/29/2022 at 8:22 PM, mooniac58 said:

I just tested dragging and dropping a JPG and it worked.  I did this from a Windows PC.  Not sure what platform you are using...

Expand  

Windows 10.  I'll keep an eye on this, and let you know if I can isolate a circumstance where it fails.

[pilot_jb]

Bumping this up for added photos.  Still looking...

[Fly Boomer]

  On 5/22/2023 at 1:23 PM, pilot_jb said:

Bumping this up for added photos.  Still looking...

Expand  

If you can't find one to buy, find your local EAA chapter.  They often have a bunch of people who are skilled fabricators.

[Aerodon]

  On 5/26/2022 at 2:05 PM, pilot_jb said:

1967 M20F.  This is the inboard and forward most oval inspection cover that is two piece construction with seven (7) screws.  Must have the nut plates attached.  Thanks!

Expand  

I'm looking to replace some panels too (corrosion, unnecessary holes etc.).   I was surprised how many part numbers there are for the wing panel, and that they change by serial number.  That inboard one is 'double' and installed with structural screws.

 

Aerodon