Marc GER Posted January 22, 2021 Report Posted January 22, 2021 I am redoing my panel and I need to make a new right side panel. Does anyone have a CNC drawing for a 67 M20f. Maybe a file that I can take to a CNC shop. Thanks a lot. Marc
carusoam Posted January 22, 2021 Report Posted January 22, 2021 Marc, There are a few threads around here where people have discussed sharing cad files like you are asking... There may even be drawings in the download section... Best regards, -a-
0TreeLemur Posted January 23, 2021 Report Posted January 23, 2021 3 hours ago, Marc GER said: I am redoing my panel and I need to make a new right side panel. Does anyone have a CNC drawing for a 67 M20f. Maybe a file that I can take to a CNC shop. Thanks a lot. Marc Hi Marc, It was a few years ago, but I think that I have one for the RHS of my M20C. Should work, right? .dxf format. Fred
67 m20F chump Posted January 23, 2021 Report Posted January 23, 2021 I used CAD to make mine. Cardboard Aided Design. It worked.
Baker Avionics Posted January 23, 2021 Report Posted January 23, 2021 4 hours ago, Marc GER said: I am redoing my panel and I need to make a new right side panel. Does anyone have a CNC drawing for a 67 M20f. Maybe a file that I can take to a CNC shop. Thanks a lot. Marc Marc, I have one for a C, E and K 2
Marc GER Posted January 23, 2021 Author Report Posted January 23, 2021 9 hours ago, 0TreeLemur said: Hi Marc, It was a few years ago, but I think that I have one for the RHS of my M20C. Should work, right? .dxf format. Fred Hi Fred, Maybe you could send this to me. That would be awesome. I do not know if the C is the same as my F, but I'll try. Thanks a lot. Marc
Marc GER Posted January 23, 2021 Author Report Posted January 23, 2021 8 hours ago, Baker Avionics said: Marc, I have one for a C, E and K The E should be the same as an F model since the F is only the extended fuselage. Do you have that in a CNC usable file, dimensions only in a drawing are also perfect. Thanks a lot up front. Cheers Marc
Marc GER Posted January 23, 2021 Author Report Posted January 23, 2021 7 hours ago, Robert Hicks said: I’ve got one for C Hi Robert, Thank you very much. I will try the file from Fred for the C model. Happy landings. Marc
Robert Hicks Posted January 23, 2021 Report Posted January 23, 2021 Just finished drawing and programing a left side as well. Lemme know.
Marc GER Posted January 23, 2021 Author Report Posted January 23, 2021 7 minutes ago, Robert Hicks said: Just finished drawing and programing a left side as well. Lemme know. Hi Robert, this looks fantastic. Maybe you could send me your right side panel too. If think my shop can work with this. Thanks up front. This Mooney community is just amazing. We do not have something like that in Europe since there are far less Mooney around.
carusoam Posted January 23, 2021 Report Posted January 23, 2021 Marc, Look around when you have time... We have many European MSers as well... there is also a European section on MS... There is also a European site, that those MSers visit often... After a while you get to know many MSers... you may recognize them in other places... The world wide brotherhood of Mooniacs... Go MS! -a-
Robert Hicks Posted January 24, 2021 Report Posted January 24, 2021 Just finished the one a few posts up. Turned out great. 1
TCUDustoff Posted January 24, 2021 Report Posted January 24, 2021 So does anybody have a cad drawing of the completely STOCK "underframe" for a 68? Call me an weird, but I like the woody look of the 60s Mooney's; since I can't easily unbolt the co-pilot side to make a trace, I want to laser cut some nice 1/4 inch birch plywood and stain to make a new overlay. For the pilot panel, I was just going to trace and then manually cut and sand.
Recommended Posts