Needed KT76A

[Drumstick]

I broke my leg and my KT76A on the same day.   I need to get a transponder installed in order to get my M20C flying.   I'm also trying to find a couple of local mooney flyers to put an hour or two every couple of weeks until my knee heals.

[FoxMike]

I have a KT 76C that was removed for a Garmin 345.  It is out of a 1999 TLS that was always hangared.  Low time would be a super replacement.  Let me know if you have interest.

Walt Bell

[gsxrpilot]

@Drumstick I've got a KT76a that I just pulled out for a panel upgrade. Make me an offer and I can send it right out to you.

[jerryg324]

I have a KT76A also sitting on the shelf...   706-767-3880 cheap,cheap,cheap

[HRM]

So pleased to see these. The Xpndr that won't die. My ADS-B out is pending the death of my KT76A or 2020, whichever comes first 

[Drumstick]

Thanks everyone!  Currently pricing out a KT76C.  Primarily because it comes with a warranty.  I'm not in a super big hurry anyway because I won't be able to fly until probably June.

[peevee]

3 hours ago, HRM said:

So pleased to see these. The Xpndr that won't die. My ADS-B out is pending the death of my KT76A or 2020, whichever comes first 

Maybe not the death for too many if levil gets their add on system certified.

[peevee]

2 hours ago, Drumstick said:

Thanks everyone!  Currently pricing out a KT76C.  Primarily because it comes with a warranty.  I'm not in a super big hurry anyway because I won't be able to fly until probably June.

Why not a kt74? It's a drop in replacement and adsb out for down the road?

[ArtVandelay]

Why not a kt74? It's a drop in replacement and adsb out for down the road?

I believe to get ADSB you need a new tray.

[Drumstick]

5 hours ago, peevee said:

Why not a kt74? It's a drop in replacement and adsb out for down the road?

It needs a WAAS source and my plan is to install an IFD440 which is not on the ADS-B STC for the KT74.  Its a pretty expensive gamble.

[Godfather]

327's are going for $350-$450. I would never spend the money on a new one as you should be able to find nice used examples  for literally pennies on the dollar. 

[HRM]

9 hours ago, peevee said:

Maybe not the death for too many if levil gets their add on system certified.

Are they attempting certification for "The Beacon"? I get the impression that they cater to the home built crowd.

[peevee]

10 hours ago, teejayevans said:

I believe to get ADSB you need a new tray.

You do, but it's a slide in replacement for the 76 that he can use until he wants to spend the money for a position source and the installation.

[peevee]

1 hour ago, HRM said:

Are they attempting certification for "The Beacon"? I get the impression that they cater to the home built crowd.

It didn't say they weren't so who knows.

[Drumstick]

17 hours ago, Godfather said:

327's are going for $350-$450. I would never spend the money on a new one as you should be able to find nice used examples  for literally pennies on the dollar. 

I have a 327 lined up for $250 but the 1700 installation quote is unreasonable.  Need to get the install cost down for me to even think about a 327.

[Drumstick]

1 minute ago, tmoth25 said:

Got 3 kt76a transponders for sale if you still need one call me 

8084438506

all removed serviceable during upgrades 

one was bench tested and has an 8130 with it 

Good to go.  Picked up a 76C for under $250.

[wombat]

I had to replace a KT-76 the other day.     Much less common than the 76A.  

 

But I bought a used, 'working when removed' one for $150, and it worked great when I got it.

[Raptor05121]

I send my -76A out for repair, great guy in the panhandle of FL that can fix almost any transponder, I paid $100 and he realigned the power and output for me