Mooneyintn Posted October 2, 2015 Report Posted October 2, 2015 have a couple of mid sixties mooney aircraft that I am parting out. let me know if anyone has a need for parts. Quote
Ron McBride Posted October 2, 2015 Report Posted October 2, 2015 I have a 69F. Do you have the sheet metal that goes around the fixed step? Ron Quote
kmcinc Posted October 8, 2015 Report Posted October 8, 2015 I'm looking for an exhaust pipe that's in primo condition. I have a 1967 F. Quote
Mooneyintn Posted October 9, 2015 Author Report Posted October 9, 2015 Unfortunately both my planes are manual gear aircraft. Sorry guys. Quote
robert7467 Posted October 9, 2015 Report Posted October 9, 2015 I don't see where anyone was talking about gear. Do you have any autopilot stuff? 1 Quote
Mooneyintn Posted October 9, 2015 Author Report Posted October 9, 2015 Mine have the retractable step so no tubular step closeout Quote
MHemperly Posted October 11, 2015 Report Posted October 11, 2015 Do you have an oil door for the top cowling? Quote
TWinter Posted October 12, 2015 Report Posted October 12, 2015 Good condition cable for the "Power Boost" (from the power boost nose door to sliding lever on console) for my 73E. My cable is fraying and needs replaced. Quote
TWinter Posted October 12, 2015 Report Posted October 12, 2015 Do you have an oil door for the top cowling? Saw two of these on FleaBay...JFYI Quote
Mooneyintn Posted October 12, 2015 Author Report Posted October 12, 2015 I do have an oil door if you still need one. 423-273-3557 Quote
Mooneyintn Posted October 12, 2015 Author Report Posted October 12, 2015 Unfortunately, the planes that I have do not have the slides but instead have the old style push/pull knobs. Sorry I couldn't help you. Quote
Mooneyintn Posted October 12, 2015 Author Report Posted October 12, 2015 As for props. I do have one right now but it is a fresh overhaul. If your interested give me a call at 423-273-3557 Quote
MHemperly Posted October 13, 2015 Report Posted October 13, 2015 I do have an oil door if you still need one. 423-273-3557 called and left voicemail. My number 661-839-5484. Thanks mike Quote
francisg Posted October 15, 2015 Report Posted October 15, 2015 I have a 1963 M20C and i am looking for the engine baffles, a good carburetor air intake duct, a nose gear truss, a nose gear tire (500x5 6 Ply). I hope you can help. Thanks FrancisG Quote
Mooneyintn Posted October 15, 2015 Author Report Posted October 15, 2015 Francis. I have the intake boot in excellent condition, the truss, and a set of baffling. Does your oils cooler lines route up over the engine and down to the oil cooler or behind the engine and down? Brent Quote
francisg Posted October 15, 2015 Report Posted October 15, 2015 Brent I will have to check on the oil cooler routing, but i would like to take what you have, do you have fresh nose gear rubber pucks, i am also looking for front tire. Please PM or call / text at 415-279-0609 Thanks Francis Quote
garytex Posted October 15, 2015 Report Posted October 15, 2015 Need straight ailerons (flat bottom) and elevator for 67F Quote
Mooneyintn Posted October 18, 2015 Author Report Posted October 18, 2015 Gary. Which side elevator? You can give me a call at 423-273-3557. Brent Quote
N601RX Posted October 18, 2015 Report Posted October 18, 2015 I'm looking for an exhaust pipe that's in primo condition. I have a 1967 F. I have an extra exhaust pipe from my 67 F. I will get it out and post a picture next time I'm at the hanger. Quote
M20F-1968 Posted October 29, 2015 Report Posted October 29, 2015 What model and year are the planes you are parting out. Do you have long/smooth rudder, ailerons, flaps, smooth elevators? John Breda (617) 877-0025 john.breda@gmail.com Quote
MHemperly Posted November 10, 2015 Report Posted November 10, 2015 Do you have any of the overhead panel light and torpedo light rheostats? If so I will buy two. 661-839-5484 Mike Quote
JohnR Posted December 7, 2015 Report Posted December 7, 2015 I need a steel prop oil line for Lycoming A1A Mooney M20A. I have a friend with a M20B and it uses the same line. Straight fitting out of governor than 90 deg forward to run along top edge of right side oil sump. JR jrflyboyVP2@yahoo.com 512-940-8038 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.