ArtVandelay Posted July 28, 2014 Report Posted July 28, 2014 I have a couple of spots where the various trim pieces are bent, my guess from the over enthusiastic use of polishing rag. Can these be easily repair (ie without removing them)
cliffy Posted August 1, 2014 Report Posted August 1, 2014 If that is a flap gap seal, probably not. But, it is an easy fix for any A&P.
Alan Fox Posted August 1, 2014 Report Posted August 1, 2014 That looks like an aileron gap seal.......It will be easier to replace it , than to remove the Aileron to straighten it .....probably about 50.00 from LASAR..
Recommended Posts