Wanted M20C brake caliper or piston

[acrotex]

I need a brake caliper  "piston" for 63 M20C.  The parts manual says it is PN 35-202

or could use the entire caliper.    These are for use with wheels marked 40-24.  I can't find PN on the calipers any longer.

 

I found my piston is bent, slightly on the thin area where the O ring goes.

Someone must have stepped on it some time in its past.  Was trying to find out why pads on that wheel always wear at an angle and now understand why as the piston does not want to move smoothly.

[John Pleisse]

Somebody help me...... Our guy in NJ who flies a Bonanza and works on Mooney's.... he had a whole set recently....calipers, pegals and master cylinders...search this board under used parts or brakes.....

[Alan Fox]

That's me , I have a set of calipers I will sell inexpensive.... Call me at 856 419 5209 .......Alan......

[isaacpr7]

If you happen to need more parts, go to ebay and type the word "mooney" on the search bar. There are a few guys parting out their mooneys to the bare bones.

[N601RX]

The entire caliper is expensive, around $600 a couple of years ago. You can buy a new housing for around $200 and put the other parts on and in it.  I got my new housing from Spruce.  I think they sold pistons also.