Change Insight G2 CHT Bar Color Thresholds?

[jeremyc209]

I have a G2 Insight and I'm wondering if I can adjust the thresholds for green/yellow/red CHT bars. Default is red at 460 (!!) and yellow at 410 I believe. I'd prefer something more like yellow at 400 red at 420.

I can't find anything in the manual about making any of these changes, but I'm assuming they have to be adjustable somehow to account for different engine applications right?

[hammdo]

I’d call them. Mine was programmed by them. They may be able to get you the info or suggest sending it in. I had the updated screen put on mine and had it back quickly.

-Don

[gabez]

I think if you press the pg button when the probs are up it shows the settings. 

[jeremyc209]

This was the response from Insight. 450/500 for warning levels seems pretty useless right?

[201Steve]

I have an insight g2, always thought about this but… green bars, red bars, I just look at the numbers. I don’t think there’s any audio on the unit 

On 3/26/2025 at 1:58 PM, hammdo said:

had the updated screen put on mine and had it back quickly.

What’s the deal with the new screen? Any benefit?

[hammdo]

My G2 was an older version and the newer screen is improved. I sent it back for repair (EPROM  failure) so they offered the upgrade at a reasonable cost. 

-Don

[jeremyc209]

5 hours ago, 201Steve said:

I have an insight g2, always thought about this but… green bars, red bars, I just look at the numbers. I don’t think there’s any audio on the unit 

Mine is all the way left on the bottom row and the numbers are a bit small. It would be nice to have a bit more obvious of an indicator when temps start getting near the danger zone instead of the first warning being 30deg passed a much more reasonable redline for the engine. 

[201Steve]

Agree