jonhop Posted January 6 Report Posted January 6 (edited) Hi gang, I'm requesting your expertise here in sourcing a part. I bent my door hold and I might need a replacement. If my research is correct, it is part 310118-503 HOLD OPEN ARM. A quick search at LASAR didn't show anything in stock, so I thought I'd try here and give them a call later. Any insight is much appreciated. Edited January 6 by jonhop Quote
N201MKTurbo Posted January 6 Report Posted January 6 I would just straighten that one. And keep it lubed so it doesn’t happen again. 3 Quote
M20S Driver Posted January 6 Report Posted January 6 On 1/6/2025 at 11:25 PM, N201MKTurbo said: I would just straighten that one. And keep it lubed so it doesn’t happen again. Expand Or if you want to spend some money look at this https://www.ebay.com/p/6048688848 1 Quote
Brian2034 Posted January 7 Report Posted January 7 Remove it and straighten it with a hammer on a flat plate, been there done that not an issue and a 10 minute fix. 1 Quote
jonhop Posted January 7 Author Report Posted January 7 (edited) On 1/6/2025 at 11:25 PM, N201MKTurbo said: I would just straighten that one. And keep it lubed so it doesn’t happen again. Expand Funny thing... I had just put lubricant on and was going to cycle the door a few times to spread it. Edited January 7 by jonhop Quote
N201MKTurbo Posted January 7 Report Posted January 7 On 1/7/2025 at 8:49 PM, jonhop said: Funny thing... I had just put lubricant on and was going to cycle the door a few times to spread it. Expand bummer. Missed it by that much.... Mine actually did that once. I was able to straighten it in place. It has been fine ever since. Quote
00-Negative Posted January 7 Report Posted January 7 Careful buying used even from a reputable seller like BAS. That unique barrel-shaped bearing may be missing. I just did this a few weeks ago. Removed mine and installed a light weight strut which I read about on earlier threads. -David Quote
Lax291 Posted January 8 Report Posted January 8 On 1/6/2025 at 11:25 PM, N201MKTurbo said: I would just straighten that one. And keep it lubed so it doesn’t happen again. Expand What is the recommended lube, Tri-flow? Quote
Rwsavory Posted January 8 Report Posted January 8 On 1/8/2025 at 2:43 AM, Lax291 said: What is the recommended lube, Tri-flow? Expand Yes. 1 Quote
N201MKTurbo Posted January 8 Report Posted January 8 On 1/8/2025 at 2:43 AM, Lax291 said: What is the recommended lube, Tri-flow? Expand Tri-Flow is good, but anything is better than nothing. 1 Quote
PT20J Posted January 8 Report Posted January 8 On 1/8/2025 at 4:38 AM, Thedude said: Which triflow should be used? Expand According to the M20J Service Manual, the proper lubricant for the hold open arm is MIL-L-3545 grease which is Aeroshell 5. 1 1 Quote
Lax291 Posted January 8 Report Posted January 8 On 1/8/2025 at 4:34 AM, PT20J said: Lube the baggage hold open arm also! Expand You were reading my mind. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.