willerjim273 Posted October 16, 2023 Report Posted October 16, 2023 Anyone know where the roll servo is located? 80 M20K. Thanks
PT20J Posted October 16, 2023 Report Posted October 16, 2023 King and Garmin put it in the right wing near the aileron. Not sure about others.
EricJ Posted October 16, 2023 Report Posted October 16, 2023 My Century III has the roll servo in the left wing, just outboard of the bellcrank for the aileron.
ArtVandelay Posted October 16, 2023 Report Posted October 16, 2023 Look for extra rivets where there’s mounting bracket for the servo, close to L/R ailerons.
201Mooniac Posted October 16, 2023 Report Posted October 16, 2023 My STEC 55X was in the right wing, the same location as the King and Garmin servos go.
JimK Posted February 21, 2024 Report Posted February 21, 2024 This may not be helpful since you have a K Model but, on an Ovation 3, the roll servo is below the instrument panel in the center console just below he engine controls.
mooneyflyfast Posted February 23, 2024 Report Posted February 23, 2024 On my J the KFC 200 roll servo is in the right wing where the actuator rod for the aileron comes out of the wing. Inspection cover with pop rivets.
goodyFAB Posted March 2, 2024 Report Posted March 2, 2024 my k is a century 41 pilot wing, aileron bell crank
Recommended Posts