Sigma Tek 22-1280 Vacuum Switch for 65 C-model

[MooneyMert]

Looking for a  used Sigma-Tek vacuum switch for my steam gauge panel. Does anyone have one leftover after converting to a digital panel? Trying to line one up for to my upcoming annual in October.  I am located at KDVT - Phoenix

Let me know.  Thank you -Mert - 602-369-6410 

[Don Gates]

Is this a part of the Brittan PC system?  I pulled my PC out completely,  a GFC500 is going in. Let me know, got a part number perchance?

[carusoam]

See if @Alan Fox has one on the shelf (sigma tek vac switch)

-a-

[Alan Fox]

I have the high low switches , 

[MooneyMert]

17 hours ago, Don Gates said:

Is this a part of the Brittan PC system?  I pulled my PC out completely,  a GFC500 is going in. Let me know, got a part number perchance?

Thank you for responding. This a high/low vacuum light system on the panel. Not related to the Britain System. 

[MooneyMert]

3 hours ago, Alan Fox said:

I have the high low switches , 

Great to hear. How much?  How do I get in direct contact with you? 

[carusoam]

16 hours ago, MooneyMert said:

How do I get in direct contact with you? 

Click on this… @Alan Fox

It brings you to a page that has a button ‘message’

You all can send phone numbers to each other to make things easier…

Let me know if you can’t make it work….

I have Alan’s number around here somewhere…

Go MS!

Best regards,

-a-

[Igor_U]

One option is to remove the (expensive) switch and wiring and install vacuum gage on the panel.

[Mooney-Shiner]

On 8/30/2022 at 3:41 PM, Igor_U said:

One option is to remove the (expensive) switch and wiring and install vacuum gage on the panel.

I like that idea, but does it need any paperwork?

[Igor_U]

3 hours ago, ukrsindicat@yahoo.com said:

I like that idea, but does it need any paperwork?

Well, my IA was OK with it, as it is not in TC equipment list. He made a logbook entry and I already had a vacuum gage installed so I used the opportunity to move it to Pilot's panel.