Jump to content

MYSTERIOUS AUTOPILOT

Toothdok50
 Share

Recommended Posts

Toothdok50 Explorer

Toothdok50

Posted
Posted (edited)

I bought my M20C two years ago and this odd little autopilot sits down behind the J-bar and flap pump handle.  Its labeled "Mooney".  No documentation on the thing at all.  The AP works--with a little drifting and gentle s-turns.

Its obvious a one-axis AP and I'm thinking its a Century I retro-fit item (AK-319), but I'm finding a paucity of information on it, and just don't know.  Reading the Century I Manual, the controls and feature are very similar, but very different too.  The heading knob on it is a mystery.   I put an e-mail into Century describing the instrument and never got any word back from them.  Supposedly, the Century I had a "retro-fit" model and I can't find any information about that kit--called the AK-319.   I can't find any photos of this autopilot or any documentation to verify who manufactured it.  Its an all electric system, which rules out Britton, but unlike most Century I autopilots, I don't have a Century I turn coordinator.  Yes, my turn/slip instrument is electric, but there's no control knob on it, and its not branded as a Century gauge.  Just behind our baggage compartment, in the tail, there is an electric gyro instrument, which seems as if it s part of the autopilot system.  A warning label on this electric gyro warns against avoid any shocks or blows to the instrument.  I'm lost and was hoping someone in the community might provide some information on this.

I'd like to I.D. the device, obtain a manual for it and provide any sort of service the unit calls for.  Short of pulling the servo to look for a manufacturer, I don't know what else to do.  Even the electric gyro in the tail doesn't have a branding on it.

Help!

 

132.JPG

129 (2).JPG

Edited by Toothdok50
to add photo of T&B inst.
takair Grand Master

takair

Posted
Posted

ARC Avionics made them for Mooney just before Brittain.  I think they were for 62 and 63 model years.  Company is no longer, they were part of Cessna for some time.  If it wanders, it may just need a gain adjustment, which is on the back.  Have not found books on line, my friend had a hard copy that he used to get his going straight, but a little trial and error once screw may do it, 1/4 turn one way or the other.

takair Grand Master

takair

Posted
Posted

Oh....and you set the heading knob to the heading you want it to fly.  Think of it like a remote heading bug.  So, turn the left knob to heading and turn the dial to desired heading.  If you want a wing leveler, pull out the center knob and center is a leveler and turning it will turn the aircraft.  Turn to Omni and track the connected VOR or GPS.

TTaylor Experienced

TTaylor

Posted
Posted
47 minutes ago, N201MKTurbo said:

@ragedracer1977 had one of those in his C. He found all the documentation for it. If you ask him nice he may post it.

I believe it is a pathfinder autopilot.

Doesn't look like any Pathfinder I have seen.  Pathfinders were usually from the early 70's models.

carusoam Grand Master

carusoam

Posted
Posted

Nice work Brice!

The True MSer award this evening goes to Brice...

Who no longer has the Mooney.... but can really support others with his Mooney knowledge!  :)

Go MS!

Best regards,

-a-

 

Toothdok50 Explorer

Toothdok50

Posted
  • Author
Posted

Thanks all for the help.  ARC is certainly the manufacturer based on the provided manual download.  I've done a lot of searching on the web and it was fruitless.  We're really fortunate to have Mooneyspace a lot of great members who are willing to share their knowledge.  Its one reason I gladly support the site financially.  Great resource...

Kudo to Racedrager1977!

  • Like 1
carusoam Grand Master

carusoam

Posted
Posted
On 4/23/2021 at 8:03 AM, Toothdok50 said:

Thanks all for the help.  ARC is certainly the manufacturer based on the provided manual download.  I've done a lot of searching on the web and it was fruitless.  We're really fortunate to have Mooneyspace a lot of great members who are willing to share their knowledge.  Its one reason I gladly support the site financially.  Great resource...

Kudo to Racedrager1977!


Great pirep for MS Td50!

I’ll let Craig @mooniac58 know your thoughts...  :)

Best regards,

-a-

 Share
Go to topic listing
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.