MooneyTunes Posted May 27, 2020 Report Posted May 27, 2020 (edited) Seeking A&P recommendations for a JPI 900 installation in my M20J. Preferably in KTMB. Willing to assist in installation. Edited May 27, 2020 by MooneyTunes left out word Quote
MooneyTunes Posted May 28, 2020 Author Report Posted May 28, 2020 Anyone, anyone?? Bueller, Bueller....... Quote
bradp Posted May 29, 2020 Report Posted May 29, 2020 @Jesse Saintor @jclemens can probably help you out down that way 3 Quote
carusoam Posted May 29, 2020 Report Posted May 29, 2020 https://www.saintaviation.com ask for Jesse Saint https://www.aopa.org/destinations/business/26798 Ask for Jake Clemmens Both are great resources and have done great work for MSers... Best regards, -a- 2 Quote
FloridaMan Posted May 29, 2020 Report Posted May 29, 2020 My IA did an excellent job here at KSPG. http://skyaddictaviation.com/ 6 Quote
MooneyTunes Posted June 5, 2020 Author Report Posted June 5, 2020 Thank you all. Appreciate the recs. I will try to reach out to these folks. Quote
MooneyTunes Posted June 6, 2020 Author Report Posted June 6, 2020 On 5/29/2020 at 9:16 AM, FloridaMan said: My IA did an excellent job here at KSPG. http://skyaddictaviation.com/ I sent this shop a couple of emails yesterday and no response. Not sure if he's busy or failed to check his email. Will try again next week. Quote
shawnd Posted June 6, 2020 Report Posted June 6, 2020 4 hours ago, MooneyTunes said: I sent this shop a couple of emails yesterday and no response. Not sure if he's busy or failed to check his email. Will try again next week. FYI - I have gotten better response with shops if I just pick up the phone for the first call. 1 Quote
FloridaMan Posted June 6, 2020 Report Posted June 6, 2020 4 hours ago, MooneyTunes said: I sent this shop a couple of emails yesterday and no response. Not sure if he's busy or failed to check his email. Will try again next week. Just for a follow-up on this thread, I'm on the phone with the shop owner right now and he said he emailed you this morning and will have an estimate for you on Monday. Quote
kortopates Posted June 6, 2020 Report Posted June 6, 2020 My IA did an excellent job here at KSPG. http://skyaddictaviation.com/ Nice and clean bundling and support. But personally I would want it spiral wrapped over the top and rear where it's just JPI harness to avoid chaffing. Those wires chafe easily.Check out your rear silicone baffling - a lot of air cooling lost there where it's bent over and not making even contact with the upper cowling. There is a proper way to make slits to prevent that.Sent from my iPhone using Tapatalk Quote
shawnd Posted June 6, 2020 Report Posted June 6, 2020 4 minutes ago, kortopates said: Nice and clean bundling and support. But personally I would want it spiral wrapped over the top and rear where it's just JPI harness to avoid chaffing. Those wires chafe easily. Check out your rear silicone baffling - a lot of air cooling lost there where it's bent over and not making even contact with the upper cowling. There is a proper way to make slits to prevent that. Sent from my iPhone using Tapatalk Curious if you have a picture of this setup? Quote
kortopates Posted June 6, 2020 Report Posted June 6, 2020 Curious if you have a picture of this setup? Sorry, cowling is on till hopefully end of August for annual.Sent from my iPhone using Tapatalk Quote
shawnd Posted June 7, 2020 Report Posted June 7, 2020 9 hours ago, kortopates said: Sorry, cowling is on till hopefully end of August for annual. Sent from my iPhone using Tapatalk No worries. I would like to have a reference pic when I do mine Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.