Need help finding replacement 78’ M20J Oil Pressure Gauge

[Drew_Wagner]

My oil pressure gauge stopped working, certified inop by the mechanic at the field. We are both having a really hard time finding a replacement. Anyone have one for sale that has had recent panel work or know of where I can get a replacement?

Part number for the cluster is 640281-511
 
 
Sent from my iPhone using Tapatalk

[moodychief]

Call Lasar and see if they have one that will work.  I received an email a couple days ago saying they are having 50% off sale on B&D and Sigmatek gauges.

[dlmorris]

Can you send a pic. I may have what you need.

[Drew_Wagner]

Can you send a pic. I may have what you need.

Just sent you a DM with my contact info. Thanks!


Sent from my iPhone using Tapatalk

[Yetti]

Ah decision time.  Go with a EI replacement or full engine monitor....  The dark side of upgrading your plane beckons

Edited February 24, 2019 by Yetti

[Drew_Wagner]

Ah decision time.  Go with a EI replacement or full engine monitor....  The dark side of upgrading your plane beckons

Indeed it does! Unfortunately my wife and I just had baby number 3 so 6 seats are in our near future and I already have a JPI 830 in the plane. If only there were an easier way to get the 830 certified as a full replacement...


Sent from my iPhone using Tapatalk

[dlmorris]

I have that item. It was removed from my K Model when the panel was equipped with the MVP-50. Fully operational but markings may not correspond to a J Model.

 

 

Not sure if that works for you. Here are some pics of the markings. 

[Drew_Wagner]

I have that item. It was removed from my K Model when the panel was equipped with the MVP-50. Fully operational but markings may not correspond to a J Model.
    Not sure if that works for you. Here are some pics of the markings. 

What is the part number on that? My gut says it’s not legal since the markings don’t correspond, but it’s worth asking. Anyone know the answer to that?


Sent from my iPhone using Tapatalk

[ArtVandelay]

 

What is the part number on that? My gut says it’s not legal since the markings don’t correspond, but it’s worth asking. Anyone know the answer to that?

 

It’s not legal, for certified engine monitors, they MUST use limitations specified in POH to be legal.

I sold mine when I upgraded to the JPI 900, I’d be surprised if there weren’t a few stored in hangars.

 The person who bought mine I think was just storing as a spare, you might be able to buy it off him;

https://mooneyspace.com/topic/26107-annunciator-engine-gauges-1978-j-sold/

 

 

Tom

 

[mooniac15u]

Air Parts of Lock Haven can repair those Rochester gauges. They quoted me $122 plus parts a couple years ago for an individual gauge  

http://www.airpartsoflockhaven.com/

[Drew_Wagner]

LASAR had the gauge I needed and it’s on its way. Thanks everyone.


Sent from my iPhone using Tapatalk

[carusoam]

Great follow-up, Drew!

Best regards,

-a-

[SheryLoewen]

LASAR Parts has a good stock of these