Timbot Posted August 2, 2018 Report Posted August 2, 2018 I'm about to get a new fuel boost pump regulator installed and am missing a few pages from the supplied drawings. The DWG # is 940170 from International Avionics and I need pages 5.6.x and 6.x. The same drawing set appears to cover a few other component assemblies (voltage reg, equipment relay box, flap preselect) so it's possible if you have had one of these replaced you would have the drawing I require. It's for a new fuel boost pump regulator P/N 9500582000 (Which replaces OEM 800270-523, 800270-525, 800397-505). Wiring harness changes are required (hence the new drawings) Any help would be greatly appreciated.. Thanks Tim Quote
carusoam Posted August 2, 2018 Report Posted August 2, 2018 Tim, A couple of questions for you, that may be helpful...? where are you Located? What plane does it go in...? what happened to your drawings? Best regards, -a- Quote
Timbot Posted August 2, 2018 Author Report Posted August 2, 2018 (edited) I'm in Australia with a 2005 Ovation 2. The factory only sent half the drawings that go with the part and haven't sent me the rest.. Edited August 2, 2018 by Timbot 1 Quote
carusoam Posted August 2, 2018 Report Posted August 2, 2018 I think I understand the challenge... Unfortunately, I don’t have any drawings for that... But... @M20Doc might have an idea of how or where to get the drawings... (the blue box is an invite sent to join the conversation) Standby... Best regards, -a- Quote
mike_elliott Posted August 2, 2018 Report Posted August 2, 2018 I believe Stacey has replied to Smart Air or AC Airways on this request, but let us know if you or they didnt get the response. Quote
Timbot Posted August 2, 2018 Author Report Posted August 2, 2018 Got the drawings, thanks everyone. 2 Quote
carusoam Posted August 5, 2018 Report Posted August 5, 2018 Stacy is still with us! Through good times and tough times... The good times are back! Best regards, -a- 1 Quote
smegredy Posted September 11, 2024 Report Posted September 11, 2024 I know this is an old post but I'm taking a chance. I have an M20J in my shop and need the same drawing. does anyone still have access to it? I can't get the manufacturer to call me back or answer emails. Quote
N201MKTurbo Posted September 11, 2024 Report Posted September 11, 2024 3 hours ago, smegredy said: I know this is an old post but I'm taking a chance. I have an M20J in my shop and need the same drawing. does anyone still have access to it? I can't get the manufacturer to call me back or answer emails. I thought these regulators only apply to Continental engines. The M20J just has a switch. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.