Early 66 M20F gear switch

[Mooneycrazy]

My 66 M20F gear switch does operate, but the knob is loose and even when switched it is very sloppy..I did try to tighten the knob and just think its time for a new one .Does anyone know where to buy a replacement? Does someone make new ones? Thanks 

[cbarnes403]

I may have one, I'll look for it this weekend and let you know.

[DualRatedFlyer]

I would also like to know where these can be found. My is stripped and barely hanging on. 

[Guest]

It should be a Micro 1TL140-3D according to the F parts catalog.

Clarence

[Mooneycrazy]

Ok, thanks for that information......Any advice as to where to find one...?

[Guest]

  On 1/5/2018 at 12:39 AM, Mooneycrazy said:

Ok, thanks for that information......Any advice as to where to find one...?

Expand  

Google is your friend, enter the part number and Micro switch.  You’ll find many.

Clarence

[Mooneycrazy]

Ok I will thanks

 

[Mooneycrazy]

I was unable to find a switch like the factory one... Are you thinking it would have to be replaced with an aftermarket switch simluar...not sure I understand....I was thinking of a full replacement part from an aircraft parts supplier....After seeing all the Mooneys Ive seen...so many of the older ones looked in simluar condition.....I would think someone would have needed to replace theirs as well...?

[Ron McBride]

Try ebay.   https://www.ebay.com/itm/Mooney-M20E-Landing-Gear-Position-Switch-P-N-1TL149-3D/331626161390?hash=item4d3675a4ee:g:bRQAAOSw9N1Vygvh&vxp=mtr

[Mooneycrazy]

 saw this as well...Looks like the same old one I have....I