N601RX Posted February 5, 2011 Report Posted February 5, 2011 Has anyone experienced broken oil rings in their IO360-A1A? I had been having high oil consumption and my mechanic helped me remove the cylinders yesterday. 2 of them had broken rings. The oil ring on one was broken into about 8 pieces and the compression ring on another had a piece about 1/2 long broken off. The cylinders had about 4200hrs on them with the last overhaul being about 800 hrs ago, so I have nothing to complain about. I am replacing all 4 of them with a set of low time cylinders that are still within factory new limits. Quote
Mcstealth Posted February 5, 2011 Report Posted February 5, 2011 On my old dirtbikes, broken rings were common. Hone the jugs and go on about your business. Glad you are able to go on about your business. Quote
takair Posted February 6, 2011 Report Posted February 6, 2011 Quote: N601RX Has anyone experienced broken oil rings in their IO360-A1A? I had been having high oil consumption and my mechanic helped me remove the cylinders yesterday. 2 of them had broken rings. The oil ring on one was broken into about 8 pieces and the compression ring on another had a piece about 1/2 long broken off. The cylinders had about 4200hrs on them with the last overhaul being about 800 hrs ago, so I have nothing to complain about. I am replacing all 4 of them with a set of low time cylinders that are still within factory new limits. Quote
Steve65E-NC Posted February 6, 2011 Report Posted February 6, 2011 I had a broken oil ring. I think it was related to the cermachrome cylinder problem. You could see and feel a definite ridge on the walls at the top of the stroke. My compression test went way down on that cylinder. What happened with compression on your cylinders and what was the cylinder wall treatment, if any?? I wound up replacing all four cermachrome cylinders within 800 hours. Too bad as I had paid for porting and balancing. I went back with cerminil. About 1000 hours later, compressions are holding fine, but oil usage has been pretty high right from the start with the cerminil. Quote
N601RX Posted February 6, 2011 Author Report Posted February 6, 2011 Quote: takair How high was your oil consumption? Quote
sleepingsquirrel Posted February 6, 2011 Report Posted February 6, 2011 One good thing about oil consumption like that is less frequent oil changes by draining and filling. Just keep adding and blowing it out, does that qualify as an oil change after 4 hours? Quote
N601RX Posted February 6, 2011 Author Report Posted February 6, 2011 Quote: sleepingsquirrel One good thing about oil consumption like that is less frequent oil changes by draining and filling. Just keep adding and blowing it out, does that qualify as an oil change after 4 hours? Quote
Parker_Woodruff Posted February 6, 2011 Report Posted February 6, 2011 I'm about to replace rings on all 4 cyls in my IO-360 on the C172. it's at 2385 SFOH about 3 years ago. Consumption isn't bad, just drips like none other thru the breather. The ground is a mess when I'm done flying and park for a few days. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.