Saltaire Posted June 16, 2012 Report Share Posted June 16, 2012 Inlet scoop needed. Mooney Bravo. Mooney sent wrong configuration, states no longer available. Salvage yards, no success. PLEASE HELP !!! Quote Link to comment Share on other sites More sharing options...
Skywarrior Posted June 25, 2012 Report Share Posted June 25, 2012 You already checked with LASAR? Quote Link to comment Share on other sites More sharing options...
Saltaire Posted June 25, 2012 Author Report Share Posted June 25, 2012 yes, we did. we have not found it available in the US at all. Mooney says 4 to 6 months to manufacture. AOG!! Quote Link to comment Share on other sites More sharing options...
29-0363 Posted June 25, 2012 Report Share Posted June 25, 2012 Do you need a new scoop to replace one damaged by a nose gear collapse? IIRC they are made of fiberglass and can be repaired if not too badly damaged. The engine cowl bottom half on my first M20R was successfully repaired after a NGC and the Insurance Assessor had written it off. Quote Link to comment Share on other sites More sharing options...
Skywarrior Posted June 25, 2012 Report Share Posted June 25, 2012 I don't know about the FAA paperwork side of this, but Mooney could send you the drawings and a local fiberglass shop could fabricate one for you. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.